Search Results for ‘carve’

I saw it in a magazine and thought it looked pretty. I also thought it looked simple. It was not complicated, it was tricky but it was fun. Basswood and about 3 hours of work so far, maybe I'll sand it a bit and add a color to it.. then in 102 days someone will probably hang it from a green...

This box is Old Growth California Redwood with Bocte hinges, Maple splines and Walnut bottom. The dished Fleur di Leis was carved on my CarveWright machine. 3 coats of Wipe on Poly. I still have to trim the brass pins on the hinges.

No, it's not for my house. My oldest son, an avid guitar player and collector, asked me to carve something to put in his "guitar room". He's got it so bad that when he built his new house he dedicated a room for his guitars and sound proofed it so he could play to his heart's content (bless...

A Tom Wolfe inspired cane , the bird's head handle is carved from bass wood , with a black leather and crab apple spacers. The shaft is found wood , made from bark beetle damaged spruce. Materials Wood - Spruce Handle - Bass Wood Spacers - Crab Apple + Leather Finish - Danish Oil [walnut]...

Just playing around with making some spoons! The lighter spoon is made from a limb of English walnut and the darker spoon is made from a limb of Black walnut. I rough cut the shape on the bandsaw and used a crook knife to clear the bowls. The lighter one I used files and sandpaper to shape it...

I love to whittle and carve ugly.

This was a commissioned walking cane with an African Safari Hunter's Theme, featuring a carved and painted Elephant's head, using real Ivory for the tusks, and African wart hog tusks and water buffalo horn for the handle. If you would like something similar, you can contact me by email...

Finished another desk plaque, a request from my one of my kids teachers. Carved her name in a small cut off of quilted maple and inlaid it into a small block of figured Bloodwood. Added some stone inlay to the butterfly wings, gasperite I believe, looks like Opal in the photos, doesn't look...

I removed an old blueberry bush and made a spoon out of the trunk. I carved it while still green so it was easy to work the wood. I had another trunk to make another spoon but it split on its own after a few days and I couldn't use it. It has been a week or so and this spoon hasn't split so...

----------------------------- This walking cane was a commissioned piece, and so it has been Sold Cane Serial Number #2008-29 Height: 38 inches Welcome Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where you'll find a...

My wife wanted a new phone stand since she gave all of the other ones I've made her away. I found a piece of 12/4 walnut cut off and figured lets give this a try. Rough sketch on the wood after planing down the end to a flat surface, cut it out with a jig saw. When I went to smooth out the...

The Mountian Lion was carved into a spur on the elk button [what's a elk button ?] . There wasn't enough of the little spur to carve both sides of the face but I think I like the way it turned out better . When you turn the the stick you kind of discover the mountain lion hiding there. The elk...

I have several different sized Wooden "Half-Circle Groove" Curling Shackles available now. The common nomenclature for the type of hat curl someone wants is pretty hard to describe with the common names, such as "Pencil Curl" and "Kettle Curl". To help distinguish between the size of curlers I...

These pictures show Groove Tollikers I've made, used to put curves on the edges of hat brims. ---------------------------------- Sizes Available: Model VGOGT6 - 1/4" (6 mm) Vee Groove "Welt Edge" Folding Groove Tolliker Model DGT6 - 1/4" (6 mm) dia. Double Grooved Pencil Curl Groove...

I don't think this is really a true tee handle cane. I left enough antler at the rear of the handle so the whole hand can grasp the handle without needing to hook the index finger in front of the shaft. But I was hoping to keep the option open to still use this cane as a tee handle by leaving a...

Material Top - Elk antler [ Elk Button ] Shaft - Diamond willow Spacer - Brass Collar Bottom - Brass tipped Finish - Wipe-on Poly 48 inchs

This is not a very impressive piece, but I have created most of my other pieces with my old Porter Cable scroll saw I bought from Lowe's. I knew it was on its last leg, so I have been saving up for a new saw. Just so happens that I ordered my new Excalibur saw last Friday and just wanted to...

This commissioned cremains box is made from basswood with a butternut frame, lined with red velvet. The lotus flower and lion are special symbols in remembrance of DFR. Thanks for looking. Your comments are always welcome.

My wife has collected Elephants for as long as I can remember (I was her very first). I carved this Elephant plaque out of a piece of hard Maple on my Carvewright. It is about 8 inches wide and 5 inches tall. When I say that I carved this piece - I use the term carved loosley. The...

Designed this for my wife. It is cnc carved and one of a kind. I designed and build the pattern for it and won't share, so one of a kind. Unless she asks me to carve a second one. :) This was one of my first two sided cnc carved projects I successfully completed. Its carved in walnut finished...