LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Walnut and Maple Tealight Candleholder

    This 5-tealight candleholder was made from hard maple and walnut. The strips of wood were crosscut and ripped on the tablesaw before glue-up with Titebond III and 5-clamps. The maple was 5/4 and the walnut was only 4/4, so I ended up cutting a strip of the walnut to set it on edge so as to be...
  2. Votive Candleholder

    Do you ever have a day when you go into the shop with no idea what you are going to work on? That was me this morning. I knew I had some scrap Morado and Birch lying around so I grabbed a pencil and pad and came up with the design for this Votive Candleholder. A very simple design but the...
  3. Candleholder

    Spalted, wormy maple from a tree cut down in my front yard and walnut. Oil and wax finish.
  4. Candle Holder

    I made this candle holder as a Christmas present for my mother. I don't know exactly what kind of wood it is, it was a scrap at the workshop at my school. It's a really heavy, hard, and dense wood, though. Overall the candle holder is about a foot long and about four inches wide. It doesn't...
  5. Candleholder

    Inspired by MrRock's candleholder I thought that something similar would make a nice gift for my daughter. My first thought was to mix some pine with some walnut to make a contrasting wood creation but as I searched through my pieces of wood I came up with another plan. Using the tongue and...
  6. Turned Olivewood Candle Holder

    So, the sled that I built for my bandsaw made it easy to mill some lumber out of logs, including a big chunk of olive. The main pieces were quite wet, but some of the offcuts were from limbs that were dead on the main log long before the tree was felled. One of those offcuts was large enough...
  7. All Natural Candle Holder

    This started out as a piece of a branch I found in my yard. I would totally welcome comments/critiques on this. It is pretty much my first serious woodworking project.
  8. Walnut and Hard Maple Tealight Candle Holder

    I made this tealight candle holder a few weeks ago out of walnut and hard maple, but it sat unfinished down in the basement. A couple of days ago, my wife was getting ready to send a 10th wedding anniversary card to some friends of ours out in Michigan. I said if she could wait an extra day, I...
  9. 2 Candle Candelabra hand welded support with base made from Reclaimed Tsunami wood

    Handmade candelabra for 2 candles, cleaned up reclaimed tsunami driftwood base and hand welded recycled iron mid section. www.imaginanatural.cl
  10. Cross Fretwork Candleholder Religious

    Forgot to add this one as well. Also made of Walnut. Its another one from Sheila Landry. Here is another candleholder. I'm having fun making these. I'm also having fun with putting my own touches on the end result. Its made of Walnut. I glued jewerly making pearls in the holes around the...
  11. Woodsmith Magazine Candle Holder

    From Woodsmith magazine. Cant remember the issue but when I find it ill post it. As scott posted below "It can be found in volume 29 number 173." I modified the design from 6 candles to 5 as its more appealing IMHO…. Walnut base from Karson's stash…. QS oak legs laminated together. finish is...
  12. Roswell Heritage

    This candleholder is made from a barnboard salvaged from my Great-grandfather's barn prior to it being demolished. Rick and I did the woodworking and then I engraved on the back raw-edge "Roswell Heritage". (Roswell being my family name). Now, both sides of the candleholder are unique. It now...
  13. Creating Art from Scraps

    I build a lot of candle holders and sell them online on a couple of different sites, and at craft shows in the D/FW area. Often I have small scraps of hardwood lying around the shop and, periodically, I look through the pile and see what new designs I can come up with. Here are the most recent...
  14. candleholder

    Another class project for teenagers age 15-16. Perhaps some Christmas idea ?
  15. Candle Holder for Mother's Day

    I made this candle holder for my mom for Mother's Day. We had a family brunch yesterday and I presented it to her then, but explained I wasn't happy with the finish and that I'd work on it a bit more. Well, it's done now, so I'm going to deliver it today. It is made from walnut and hard maple...
  16. Black Cherry Candle Holders

    Made by request for a local Convent. Black Cherry was air dried and came from a nearby sawmill. Used Boiled linseed oil and a coat of varnish. I get my linseed oil from our county household chemical disposal dept. for free Along with thinner, enamel paint, etc. So if you don't know where it is...
  17. Crystalized Wooden Candleholder

    This is a maple burl blank that i bought cheap with no idea what it could be. I decided to turn the outside of it on the laithe in a bowl like shape. I then decided after 2 months to make it a candle holder and put it back on the laithe to create a spot for the candle to sit in. The i used a...
  18. Walnut and Pink Lyptus Tealight Candleholder

    This is a tealight candleholder that I finished yesterday as a 40th birthday present for my aunt, made of 4/4-walnut and 4/4-pink lyptus, and finished with Zinsser Bullseye SealCoat dewaxed shellac. It holds 7-tealight candles. The dimensions for the piece are as follows: Overall Length: 16"...
  19. Honey Mesquite Candle Holders

    I'm displaying this project mostly to show off the wood. Mesquite is beautiful when finished. It's hard, fairly stable and durable. Okay, yes, it's hard on the blades and it has a tendency to burn, but those are minor issues when you see how nice it looks in the end. These are some of the...
  20. Power Tools, Hardware and Accessories
    In Laguna Hills, CA PostingID: 1646654130 listing posted on 3/16/10 This is a 2 year old jointer. I got it new from Grizzly for $2500. Runs perfect. Great condition. This 12" Parallelogram Jointer will set the standard for jointers for years to come. Having front mounted handwheels, 83-1/2" bed...
1-20 of 23 Results
Top