LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 286 Results
  1. F.L. Wright Inspired Candle Holder

    This was made as a gift to my Mother for the Holidays. This pattern seemed to go well with a lot of the furniture in her home. For anyone wondering, this is a pattern from our own "ScrollGirl", Sheila Landry. She makes fantastic patterns and has a wonderful website as well. She also posts a...
  2. nesting bandsaw candle holders

    Haven't seen many of these on here, and have been lurking for a while. Made a set for a friend for Christmas and decided I should have a set for me as well. Easy as pie to make, walnut and maple glue up, a reference hole, and a piece of plywood clamped to the bandsaw table to spin it on. 1.5"...
  3. Another candle holder

    Doing new little things everyday to get better. This was my first project with 2 colors. I made it from pallet wood since I can mess up as much as I want just starting out and it is all free.
  4. Candle Holders

    Here are a couple of candle holders that were made from some old oak boards that were almost used for firewood. Not too fancy, but functional.
  5. Candle Holder

    My wife needed a candle holder and kept threatening to buy one if I put it off any longer… I just couldn't let her do that! So this is what I came up with. I don't have a lathe but I did have a huge forstner bit that was the perfect size. I was also able to use up a piece of pecan burl that...
  6. candle holder

    i haven't posted any of my small projects like this here yet cuz I usually think they are not even share-worthy, but I guess everyone's got to start somewhere…small candle holder made of a piece of walnut I got for free that had a spline in it, I centered it on the piece so it could have looked...
  7. Natural edge candle holder save

    I took a log cutoff that was cracked pretty good and was making a natural edge candle holder when a section of the bark flew off. I wasn't worried about the visible cracks as they would be covered by a candle. I started to throw it away but laid it on the table instead. I went on to something...
  8. Party Candle Holder

    This is a Project that I done awhile back as well. I call it a party Candle holder, I'm not sure the orginial Name of this project, The orginal Design is from Steve Good At The Scroll Saw workshop, so All Credit goes to him. I enjoyed the Small Table i thought I would Cut it out myself. Tech...
  9. Arched Candle Holder

    Here is a maple candle holder I made this past weekend featuring arched cherry legs and highlight stripe. Five shallow recesses were cut with a 2.125" Forstner bit to hold tea candle glasses. Overall size is 18.75"w x 4"d x 4"h. Finished with a couple coats of satin poly. The cherry should...
  10. Candle Holder

    Was looking to make a simple project I could complete in a weekend and use up some leftovers. We had half dozen of the little candles sitting on the coffee table which would slide around when you bumped the table - most annoying. So I put together the candle holder from scraps of purpleheart...
  11. votive holder

    votive holder
  12. QD Tealight Holder

    Quick and dirty tea light holder in tiger maple and peruvian walnut, finished with spray lacquer. Simple project. I like it because it illuminates the faces of people around the table without getting in the way. Eight candles to fight back the dark!
  13. Still More Art from Scraps

    This was the last of the small pieces of ash and black walnut. I decided to make a thick candle holder that could be reversed. I laminated the ash to the black walnut, cut it to size, drilled out a stopped hole on each face, and finished it with some tung oil and four coats of satin...
  14. Candle holder/goblet

    My sister wanted a tea light candle holder and said she wanted something different. So I looked through my stash of wood and noticed a couple of logs that I got from a tree that the city had cut down in my neighborhood. So I threw it onto the lathe and started turning it to see what it looked...
  15. Just messing around in the shop

    Last week was stressful at my day job and this week looks like its going to be twice as bad, so being the good LJ I headed out to the shop. I have been trying to think of what I can do with some Walnut I picked up on TN the last time I was out there. I was given some Walnut and Cherry from my...
  16. Candle Holder For Eagle Scout Ceremony

    Made this candle holder for a friend who's son is having Eagle Scout ceremony. Made from cedar I cut here on property and milled into dimensional lumber. Planed it to 2 1/4" then used jigsaw to cut pattern out. Used 1/4" poplar for inlaid pieces. Routed 3/8" deep in center opening so that Eagle...
  17. Candle holders

    Here is a set of three candle holders I made for my mother. I turned them from a piece of 3X3×12" purpleheart. The color looks a lot better know that they are a few months old.
  18. Centerpiece

    Sapele, Maple and million coats of Shellac because I am terrible at finishing.
  19. Walnut and Maple Tealight Candleholder

    This 5-tealight candleholder was made from hard maple and walnut. The strips of wood were crosscut and ripped on the tablesaw before glue-up with Titebond III and 5-clamps. The maple was 5/4 and the walnut was only 4/4, so I ended up cutting a strip of the walnut to set it on edge so as to be...
  20. JAPANESE ZEN

    This is another dream i remembered when I woke up the other day. Having totally failed at a different design the previous day a thought I try Japanese and my wife ask if all those words ( FUJI MAKITA DIAWA ETC ) I was using while designing and building this piece where Japanese ? The design is...
1-20 of 286 Results
Top