LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Projects Custom cherry cabinet with angled shelves for hand tool storage and display

    This is a custom cabinet for storage and display of hand tools. Made from a combination of cherry plywood and solid cherry. Features angled shelves secured with lamello clamex. Lights are just inexpensive low voltage units from Ikea. The most interesting part was design of execution of a bunch...
  2. Projects Dining Room Cabinet / Buffet

    My grandson recently moved into his first apartment, with a minimal amount furniture. The apartment is small and there is a living room - dining room combination serving these two functions, and the kitchen is also small with almost no storage, so I was asked to make a cabinet. I made this...
  3. Trevor's Cubbies

    These Cubbies were made for my Grandson's play room. They were prefabricated in my shop in Salisbury,Md., & assembled in my son's garage in Douglasville ,Ga. The 1st pict are the upper 5 Cubbies; the 2nd are the 3 base Cubbies; 3rd pict the Cubbies assembled (insides finished); 4th pict the...
  4. China Hutches

    These are a few of the china hutches I have made over the years. The first three cabintes are made of red oak. The corner cabinets are made of birch with a walnut stain. Face frames, side frames, doors and drawer fronts are of 4/4 solid stock. All other parts are cut from sheet stock. All my...
  5. Hot Wheels Case

    My uncle made this "A" shaped Hot Wheels case for my cousin's kid and asked me to paint it for him. My uncle used to do some really amazing wild-life carving's but arthritis has sadly ended his carving career. When I got the case it was solidly built but in need of some finishing work. I made...
  6. router accessory cabinet

    Made a little cabinet to hold router bits & accessories. It is designed to fit perfectly under my new router table extension. Just enough room for everything. Fence stores on the lower back side when not in use. Third photo shows rear shelf without fence. 4th photo shows fence in stowage. Two...
  7. Barnwood Gun Cabinet

    A gift I made for my father. It sits in a very narrow room so it's tough to get a good picture, but I was happy with it. Love working with old barnwood and other types of re-claimed/recycled woods.
  8. Speakers & Stands

    Well a few of you may or may not have followed the one or two blogs on these... Whilst I can say the are not finished due to they don't have any for of protective coating as of yet, I can say that I have finished because I won't be doing that and the owner of them has not decided himself as of...
  9. Three stories shelve

    Three stories shelve To store the toys of my boys (just on eof them was born when this project wa finished) I made a three stories shelve. Actually, the three shelves are independent of each other, each is a trapezoid without the base. The angles are 100°, so the angle connectors were set-in by...
  10. Oak Book Case

    Oak Book Case measures 22" x 32" x74" high False top attached to top of crown molding so client can display keepsakes Dovetail drawers with under-mount slides. Pre catalyzed lacquer finish.
  11. Barware rack for camper trailer

    I have an ongoing series of commissions to outfit a camper trailer with various bits of built-in cabinetry. This is the first of those pieces - it's designed to hold a few bottles, some barware (cocktail shaker, etc.), and a few martini glasses. Most of this is 3/8" thick black walnut, resawn...
  12. This table really sucks...downdraft sucking that is!

    Wanting to build a downdraft/outfeed table for a while now since I do a lot of sanding/shaping/carving with my intarsia, I searched LJ and the internet for ideas. I was happy with a style that I found through Clint Wenthur, the link to his project blog is here...
  13. Garage Storage Solution

    Finally worked on the back wall of the garage / workshop. As you can see from the picture, it really needed some organization. After seeing the cabinets that Guido Henn built (Chaos Theory Cabinets), I knew I was going to have to do something similar. I really love the way they turned out and...
  14. Heart Pine Corner cabinet

    I was informed that I we needed a corner cabinet to house a new television in what was going to become our exercise room. So I took up the challenge and went to work. I have never attempted a corner cabinet before and had not really thought about how they are constructed. This project taught...
  15. Cherry Secretary rollup desk.

    Cherry secretary I made for my wife's birthday.
  16. my kitchen

    This is my kitchen. This was my little rush back in '06. We were trying to get it done for x-mas and ended up working on it until 2am Christmas day. Boy was I tired on Christmas. But, we wanted to have family over to our house for the holidays and couldn't with such a huge mess. The granite...
  17. Repurposed cabinet

    While stationed in Wales many years ago I built a solid White Ash cabinet for my component stereo system. It was our only entertainment contact with the wider world because American televisions did not work there. Now it is obsolete and in the way. I did not want to throw it out. The thought...
  18. Shaker Media Cabinet

    This cabinet was a long time in the making. It is over 7 feet tall and 50 inches wide. It is solid wild Virginia cherry procured from Appomattax, VA via Craigslist. It has a six panel solid back with mortise and tenon rails and stiles. It has two sliding dovetail shelves and a sub top that has...
1-20 of 500 Results
Top