LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Lathe Tool Chest

    My Lathe Tool Chest. Thanks for seeing.
  2. Jewelry Box

    I made this box for my wife as an anniversary gift. The box is made out of maple and maranti was used for the box bottom and inside trays. I used paste wax on top of a few coats of cherry gel stain. This was my first crack at the finer side of woodworking. I made the coves for the box sides...
  3. New Assembly Table (to thwart the "uneven demon")

    I decided it was time to get serious about this whole woodworking thing, and dedicate a DEAD FLAT space for me to work on. For the last year I have been working on a 3/4" sheet of MDF screwed to an IKEA butcher block-- Woof. I considered building a fancy workbench, but they just don't have...
  4. Turning Custom Wooden Cabinet Knobs

    Hey, guys! I just put a new post up on the Rockler Custom Cabinet Knob Turning Kits. These kits are new and let you make a wooden knob with some nice metal accents in two different varieties, modern or traditional. I used the traditional kit and turned some walnut knobs for a project I have...
  5. Power Tools, Hardware and Accessories
    I am wondering if there are a soft closing cabinet door hardware option in a scenario where the pre existing cabinets I think have a partial inset to them. I have attached a photo of the door. The frame has a facing on it and the gap between the edge of the door and inset are 3/8" as shown in...
  6. Blogs
    The commitment I've always heard that-if, for example, you're going to quit smoking-it helps to tell everybody you know that you're going to quit, and on what date you're going to quit. It helps get you committed (something that's been talked about, in my case, for years!). So … here I go...
  7. New

    Off Topic Coffee Lounge
  8. Power Tools, Hardware and Accessories
    I am having an issue installing no-mortise inset hinges. I have tried both full wrap and partial wrap hinges and have the same problem. The issue is that when I get the hinges installed the inset doors will not close properly. They won't close fully as they spring out about an inch on the...
1-8 of 8 Results