LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 167 Results
  1. Nursery: window seat, bookshelves and desk.

    I finished this nursery room last year. It was my first try at cabinetry and took about 3 months of spare time. I used birch plywood (would do MDF if painting again) and then poplar for all the trim. It was also my first shot at making 5 piece doors, drawers and all that fun stuff. I fell in...
  2. Built In Dresser with Flanking Closets

    This was a fun project. Origionaly it was and open alcove with a TV and a few shelves. Plywood and white enamel, realy classy. This is an old barn turned house so we were going through and removing all the anachronistic trim, flooring, etc. This is the master suite and i was tasked with...
  3. Built-In Desk Uper Cabinets

    Hello LJ Buddies, Its been a while. Catching up on old projects. I finished these upper cabinets in December. This where my kids do their homeschooling (hybrid). I did the base cabinets the year before. All made of Birch plywood, even the face frames. Fine tuned my HVLP skills using the...
  4. Built in bookcases

    These are built-in bookcases that I designed and made for my wife's sitting room. They are made from birch plywood and poplar. I'll be finishing up the shelves soon. They'd are also birch ply and polar. They have reinforcing edged on the front and back as I wanted them not to sag on the 34+"...
  5. Cabinet and bookcase

    A built in cabinet with a book case i built to mirror one that was previously built. Turned out pretty well, only a couple little things to finish up. Built with birch-ply and paint grade maple. With an oak counter top.
  6. Built-in Bookcase

    Replaced an existing small bookshelf with this built-in, full length bookcase.
  7. Built-In Dresser

    This is a built-in dresser that I built for the master bedroom in our home. I finished this project more than a year ago, but this project is still one of my wife's favorite things to chide me about. The first step in the project was to cut a hole in the bedroom wall. After that, I built the...
  8. Bookshelf/Cabinet Built-In

    March/April 2010 - Pine/MDF - 72"w X 108"t X 21"d
  9. built-in entertainment center

    This is a little quick built in entertainment center painted swiss coffee. The first picture is the initial design in KCDW presented to the client. While discussing it with the client we put the speaker cloth on the center section instead of the side, made the panel above the TV a single flip up...
  10. Linen Cabinet Built-In

    June 2010 - Poplar/Pine/MDF - 30"w X 84"t X 18"d
  11. Mantel and desktop

    I completed this mantel and built-in desktop for a home that was being renovated. The owner wanted a mantel that looked like it dated the house which was around 1870. The wood is white oak (much quarter sawn) and the finish is varnish (General Finishes Urethane Topcoat). I found the wood for the...
  12. Playroom built-in's

    We bought the house 5 years ago and the basement never got much love. With baby number two coming (due St. Pats day) my wife wanted the basement cleaned up to allow our 4 year old the opportunity to play and watch a movie out of the way. Plus it allows a place to send the kids to when we host...
  13. Resume for Santa... Built-In Corner Media Cabinet

    Dear Santa, I know I haven't written in a while, been super busy being a grown-up and all, you know how it goes… but now I have two little guys that are completely enamored with you. You bring joy into our home two months out of the year and I thought it would be awesome if I worked for you the...
  14. Built In Bookcases

    This is a built-in bookcase I made for my sister and her husband. The material is just painted MDF to keep the cost down and shelf sleeves and pins from Lee Valley. It was a fairly simple job but a bit huge for my tiny basement workshop. Sorry, no progress pictures, maybe for the next one...
  15. Built-in Cabinets

    Here are a set of cabinets that I built between a chimney and exterior wall and there was a hot water baseboard heater that the customer wanted me to leave and work around. She also wanted access to be able to clean and if necessary, bleed the unit. I made the little panels on the bottom...
  16. Narrow Bathroom Built-in Storage Towers

    These narrow built-in towers were ordered by a customer in dire need of storage in a tiny bathroom. Built from birch veneer plywood and solid birch. The stain and all design elements were dictated by the style of the vanity that was already in place. The drawers run on full extension slides...
  17. Phase 1 Entryway: Solid Cherry Bench w/ Drawers

    Alright. Up for you viewing pleasure is phase 1 of a built in setup for our entryway. It features a solid cherry bench top, 3/4 inch ply cabinets, poplar euro style face frame, poplar raise panel drawer fronts, and 100lb ball bearing drawer slides. Dimensions are 10' long x 18'' high x 22''...
  18. Sizeable Built-in

    Built-in I made for our previous basement. About 17'x8'. I had to scribe a 10' piece above the crown because the ceiling was out an inch from one end of the shelves to the other. The floor was out over 2" so the baseboard underwent some substantial scribing as well. I think it turned out nice...
  19. UNIQUELY DESIIGNED BUILT IN SHOWCASE

    Design consideration: Show case should be simple combination of wood and glass. The alcove dimensions are 30" wide, 48" tall and 8" deep. I decided to divide the space vertically into 3 equal parts by making a rectangular box of full height and 1/3 width. Box joinery is through pocket holes, on...
1-20 of 167 Results
Top