LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 71 Results
  1. Bread boards/cutting boards

    I put these together for Christmas presents, I like contrasting woods I hope the relatives do also. The woods are cherry,walnut, maple, hickory, teak (thought it was mahogany until I cut it, to late) and oak. I had already started the boards when I read a comment from someone about oak being...
  2. End Grain Cutting Boards

    Last October 2006 I was looking through one of the many woodworking magazines I receive and saw some cutting boards. They looked really nice, so I decided to make 12 of them for gifts. End grain of Maple, Walnut and Cherry. Edge glued different widths together in a solid piece. Then crosscut...
  3. Cutting board gifts for family

    This coming weekend my sister and I will be flying to Houston to visit our half sister. We have not seen each other for almost 8 years but email and call to stay in touch. My half sisters birthday is next weekend while we will be visiting so I made her a cutting board as a gift. Another one of...
  4. Yep, more cutting boards

    I put together a few more cutting boards for Christmas. The Paddle style boards are for my siblings, made from a 24"x24" cutting board my dad used to use to cut up homemade pastas. I've had to add cherry to the boards to make them large enough so that each sibling got a portion dad's board...
  5. Board Cabinet

    This cabinet has the sole purpose of storing table leaves (or boards). There are thirteen leaves here…they fit into a quarter sawn white oak extension table I also made. The drawer on top is to store things like table cloths and silverware. The wood is reclaimed wormy chestnut from a tobacco...
  6. dipping boards

    not my idea closetguy made some i liked it a lot so i made a jig (not as nice as his) and started to bang them out first is purpleheart,maple and padauk 2ND is maple,winge and padauk 3Rd is maple, canary wood and padauk 4th set is hickory 2 router bits and your all set 1 bowl bit and 1 straight...
  7. Cornhole Board Set :- Patriotic Style

    For a 4th of July present to my best friend I made him his own set of cornhole boards and score board It's very simple to make only requires (2) 2'x4' plywood (4) 2"x4" wood Some screws I used pocket hole screws so as that you don't see the screws Glue It came awesome and with a little help...
  8. Padauk & maple bowl

    This is the first bowl I have made with Padauk, and I really like it. I turns well and it goes well with the maple. I included before and after turning pictures in case you are interested. Thanks for taking a look, George
  9. 2017 Christmas gifts - Cheese Boards

    This years Christmas gifts created by the garage elves, lol. Various wood and scraps in differing patterns. Included are some plans of Ambrosia Maple. I thought they turned out well. Hoping for happy recipients cause we all need to be able to cut cheese!!!!! Merry Christmas all you awesome...
  10. Cornhole Boards - Quiet, Silent

    Updated 1/11/19: we pulled out the insulation and filled the boards with concrete and put a 3/4" backer board underneath. We used green glue between the framing and the bottom backer board to help dampen vibration. They are about 1/2" higher than regulation, but they are SUPER quiet now...
  11. Cross Box

    This is a box I made for my sister for Christmas. She is expecting her first child and I thought this would be something nice for the baby. We're not particularly religious but I am the Godfather so I thought it was fitting. It is made from Cherry, Black Walnut, and Poplar(bottom). The tab to...
  12. Alice wonderland cutting boards and some stripes

    The 2 large boards are built with cherry, walnut and purple heart We built these a few months ago, but was not happy just the mineral oil finish, it made the purple heart really brown really close to the walnut )-: I finally decided to try Watco butcher block finish, it actually builds a...
  13. REPRO BOARDS AND STICKS

    Repro beech boards and sticks, made for small company who is making knitted decorations (last photo). Sticks - 20mm diameter, lenghts : 25, 33, 50 and 70 cm (my job is only cutting and rounding edges - I bought them directly from manufacturer as 2 m rods) Boards - 20mm thick, 40×20, 20×20 and...
  14. cheese boards plus a hex

    some cheese cutting boards that i experimented with. had a lot of fun. the hex was one i have wanted to make for the longest time. many thanks to spalm and jm82435 for the idea and assistance!!!
  15. Cribbage Boards

    I am still relatively new to woodworking (although I did have it in school over 20yrs ago) and thinking that I am still on top of it..LOL I thought that I would make my christmas presents this year. I made all of my brothers and sisters families a cook book holder ( they turned out very nice-I...
  16. The Twelve Boards of Christmas

    Well I finally finished this years presents. Thanks to all the jocks for their ideas and techniques. There is a 13th board that needs repair do to the "routering a juice groove learning curve". A special thanks to Closetguy for helping me along and answering my questions. So far the boards...
  17. sushi boards

    I made these sushi boards after being inspired by several other LJer's creations. The wood is primarily maple with an edge of walnut and tigerwood. I did make the walnut a little proud of the tiger and maple primarily for aesthetics. I found some really nice bowls for $2 each and set them in...
  18. Cutting boards

    I know there have been a lot of cuttingboards posted, but I enjoy seeing the different patterns and styles posted, and variations of earlier boards. I made a few for next Christmas gifts for family. I had been working on kitchen cabinets, but had to stop temporarily because children moved back...
  19. Bow Arm Morris Chairs

    Bow Arm Morris Chair I just finished for my wife's friend's wedding gift.
  20. Boomarang cribbage boards

    These cribbage boards were created out of Cedar for a customer in Minnesota. The patterns did not exist so had to create everything from step one. It has a very soft grain and was interesting to work with because of the softness of the wood. Overall dimensions of this board are 2 inches wide...
1-20 of 71 Results
Top