Search Results for ‘blum’

There are a lot of different jigs on the market for mounting drawer slides. The are all based on holding the slide in place where it needs to go and screw it in place. This gives a lot of room for error, because the screw holes are so big and you do not have a lot of room inside the cabinet to...

Thanks for checking it out, it's a dresser for my our one on the way. There's also going to be a small frame that will sit on top to allow for changing table. I couldn't justify building something just for changing, didn't seem worth it. The dresser is full sized, based off dimensions of our...

This is a fun project I did for a customer that wanted to do a simple outdoor cabinet for their flat screen tv. The cabinet is made of MDF. I laminated 1/2" pieces together to give it the paneled look and to increase the strength. The hinges are Blum 170° Full Overlay euro hinges and I used 3...

This is a set of pullouts I built for a peninsula base cabinet in our kitchen. The pullouts are hybrid drawers/shelves with cutout handles. They're mounted on 21" Blum undermount drawer slides (563H series). The slides are attached to vertical maple standoffs screwed to the cabinet...

The first piece of furniture we bought after we got married was a four drawer dresser a la This End Up. Our headboard for the bed was not of the same style but had been a gift so we just kept using it- for 30 plus years. This year we decided to junk it as its particle board nature was showing...

Because our first baby comes within few weeks, I need to hurry up and complete my honey do list. I have tackle down organizing basement today. My wife suggested me to buy several storage shelves from Lowes… I found out that storage shelves are not cheap! It goes from cheaply made $35 to...

This is my first posting, My friend and I have sent the afternoon in the garage turning some wood from the woodpile. The first two pics are from scraps from abandoned bracelet projects. The top is spalted oak, walnut neck and a cedar base. The edges were too thin to hold the knot, so it was...

This bowl is made from macassar ebony and finished with friction polish.

A few months ago, I completed a headboard as the first part of our bedroom suite. You can see it here. I have now finished the first dresser. There will be one more dresser and 2 night tables with drawers before the whole bedroom suite is done. Been a bit slow going as other projects seem to...

heres another clock i made, this one is made from walnut and curly walnut. the center piece is 4" and the arms are about 8" so its about 20" in diameter and 3/4" thick. finish is danish oil and wax

Every year for the last 10 years we have made Christmas gifts, which is up to 50 now between my wife and I. I try and do a gift that the user has never seen before and this year I got the wild idea to do the "bowl from a board" my wife changed styles 3 times and the tongue and groove was the...

This is a little redundant because this is featured in my workshop post, but I wanted to get it out there as a project to allow others to find it and give some design ideas because I relied so much on the projects posted of miter stations for this design. Many were from lumberjacks and I thank...

We finally finished the second vanity and dropped it in place last weekend. Now we can paint the last of the trim and wrap this bathroom project up. The vanity carcass is 3/4 plywood for the sides and bottom, 1/2 for the back. The face frame, door frames, door boxes, door faces and shelf are...

I've been working on remodeling my kitchen for about a year now. The last main piece is the pantry you see in the picture. My original plan was to use a pilaster system that would allow me to change the placement of the drawers whenever I wanted. But, this proved too complicated and instead I...

This is a simple cabinet/bench storage project I did for a customer. I used Blum soft close hinges and a piano hing for the bench. The entire 5 piece system is made of MDF. I trimmed it our with standard quarter round. The idea was to match the look of the existing home while making good storage...

This was my first attempt at a winged bowl. Made from a crotch piece of walnut approximately 14 inches long by 10 inches. There was a void in one end of the bowl top where I inlayed blue crushed rock. It was pretty wild having the wings fly around on the lathe as I turned it. Didnt lose any...