LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 175 Results
  1. Cherry, Maple and Alder serving Box

    I made this box for my Father for fathers day, he is always having barbecue's for my family, and his table outside was always full, so i thought i could house the paper plates inside a box so they would not blow away and make more storage above them. Then I had the idea to add the steak knives...
  2. Walnut End Grain Block

    Probably our finest product? You decide! http://www.pangadesign.com/Product-13965/Panga-Design-Collection-for-the-kitchen.--Beautiful-designer-kitchen-kit-from-Panga.--Buy-huge-chopping-boards,-accessories-and-serving-dishes./Chopping-Boards/End-Grain-Blocks/80mm-Black-Walnut-Butchers-Block A...
  3. Osage orange and curly maple cutting board

    First cutting board ever from osage and hard maple cut at home and milled in small boards on my bandsaw. Tools used: Craftsman 14 inch bandsaw Porter cable 6 inch jointer Handheld belt sander
  4. Custom Jigsaw Puzzle

    Kids have so many toys these days, it's very hard for a grandpa to know what to get for a five-year-old's birthday. My solution is to make something for my grandchildren, and give them a little cash along with that so they can buy whatever toy they might want. This year the gift is a jigsaw...
  5. Panama Hat Crown Block Restored Restoration Fixed Repaired with New Sculpted Tipper Top Press Making

    This project is a restoration of a Panama Hat Crown Block and the mating Top Tipper that I made new. ------------------- Project Story: I have been making a lot of Hat Maker's Tools, especially since the economy went down and the bigger flashy furniture commissions became few and far between...
  6. Wine Stoppers and Holding Block

    Smaller project I made for my mother. Turned two wine stoppers. One is made from Zebra wood and the other from some Rainbow Poplar. Both are finished with a friction polish. I made the block out of some Pau Rosa wood and made an inlay border around the bottom with Wenge. The block was finished...
  7. Narrow Stock Ripping Push Block Jig

    Narrow Stock Ripping Push Block Jig I had the need to rip some narrow stock and every time I need something like this I never had a proper jig. So I put together this push block type, roughly, dirty and quick from any scrub I had around to check if this works. Surprisingly it does work for what...
  8. Mobile Kitchen Island

    This is a kitchen island that a friend of mine wanted me to build him. He loves to cook (and is extremely good at it) and he needed more work area in his kitchen. He wanted something that was mobile so he could move it around as his apartment is smaller in size. He wanted a work surface that was...
  9. shuffleboard table

    shuffleboard table custom made for ski house solid wood board 13' long built to last a lifetime current owner is selling house so the table is for sale contact me if interested www.SHAUNKILLMAN.com
  10. Another Mixed Hardwood End Grain Board

    Hot off the press today with another 3 near complete (pics to follow). Really pleased with this one as the end grain showed some gorgeous colouring and detail. Oak, Ash, Padauk, Sapele, Maple and Beech. Rounded finger holds added using a 1/4" bull nosed router bit. Dimensions - 450mm x 320mm x...
  11. Off Center Turned Door Stops

    A while back, I turned a door stop off center to see what I got. I wanted something different than the hundreds of examples on the Net and I really liked the result. For that offset turning, I used a 2×6 of mahogany (http://lumberjocks.com/projects/298570). The other day, I was cleaning up and...
  12. Koa wood Wave

    Video here: I got a piece of koa wood as a present and it was pretty enough to frame- but far to thick. I ripped this piece off with a combination of hand and power tools, then make a sunset from paduk and a frame out of curly maple. The blue areas are a mix of epoxy and pearl pigment
  13. Sanding blocks

    As I recently posted in a blog, I've been getting stuff done. Today it was some sanding blocks. So. Up to now, like many, I used the typical sanding block you get from <pick> - a block of rubber, rounded on the top, with slots cut on either end to hold the paper and a set of nails WAAYYYY up...
  14. Round Cutting Board

    Walnut end grain cutting board, with wedge shaped pieces. Each wedge is 9 degrees, consisting of nine pieces each. Overall size is 29 inches, one and a half inches thick. I was able to rout a fancy design in the center, featuring a 'B', for the customers last name. This design is taken from...
  15. Hat Making Tool Custom Shape Crown Hat Block Set Long Oval Shape Cowboy Western Hats

    Custom Shaping of Long Oval Shaped Crown Blocks This is a project I did for a custom hat making shop in Texas. This is a "Crown Block", used to do the preliminary shaping of the felt hat body into the shape of a head. I make several other tools that are used for the shaping and cutting, etc...
  16. Scrappy End Table

    What do you do with all those leftover scraps of 3/4 inch wood from a summers worth of projects? You glue them all together and make an end table that looks like it took days of planning and work. Even with the 100 pieces and tapered legs, this project took me less then 10 hours. The center...
  17. Kitchen countertop.

    Hello Everyone, Posting pictures of a portion of our kitchen countertop. The Walnut is reclaimed barn wood. Hope everyone approves. ~Matt~
  18. Butcher Block Cart

    Butcher block cart. The top is walnut and end grain ash. The base is fir and pine.
  19. Recycled Butchers Block For My Wife

    I made this butchers block for my wife for Christmas. It's I'd 85% recycled. I bought the oak legs. I found the wood for the block in a home remodel. It took about six weeks for everything to set. It is hard as a rock. My brother in law did the art work he is a very talented and established...
  20. Baby Block for new Grandbaby

    I was blessed with a new grandbaby earlier in the year - our first. So I wanted to make one of those baby blocks that shows the date of birth and other details. But most of the ones on the net seem to be using a solid wood block so you end up with end grain on two sides. This one was a little...
1-20 of 175 Results
Top