LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Power Tools, Hardware and Accessories
    $49 from Tay Tools! Just tried out and compared to my recently sharpened Forrest WWII blade. NOTES: 1. Cuts, as good as or better than the Forrest. I personally like a 40 tooth combo blade for general purpose cutting. 2. .087 plate and Forrest is a bit thicker (.092) 3. Kerf is the same 1/8”...
  2. Power Tools, Hardware and Accessories
    Background: I have a Sawstop CNS Contractor Saw. I had previously (about 6 months ago) utilized @aktrout's excellent blade alignment guide to get the blade parallel within a couple thou of the miter slots. My saw has the Pro fence, which is mostly great, but the face is unfortunately not dead...
  3. Power Tools, Hardware and Accessories
    Hey all. I've got a Craftsman 113.298 that I picked up for free off craigslist recently (really lucky find). Couldn't really give it a once over when picking it up since it was out on the curb and I wanted to snag it before wasting a trip a few towns over. Got it home and it's got a bit of rust...
  4. Power Tools, Hardware and Accessories
    Last year, the county cut down a tree near my house and the guys were nice enough to leave me a few sections of the trunk. I'm pretty sure it was a birch tree, if that has anything to do with this. Last weekend, I chainsawwed it up into sections that can fit through my bandsaw. I ended up with...
  5. Walnut Clad Pump Dispensers

    Using the project info. from the WOOD magazine: Walnut Pump Dispenser ( Oct 1991 Issue 46 P.74), I made a couple of lotion / soap dispensers out of 1/4" Walnut. I'm going to make a few more using scrap oak pieces. By the way, the most critical tool used for this project was the digital angle...
  6. JenAire cutting boards

    I made these for an old neighbor some time ago, Cherry, Jatoba, Maple, Walnut and Moradillo, double sliding dovetails on the end boards.
  7. Underwater World

    Hello all, it's been awhile since I posted a project because of my broken hand and then playing catch up to get some projects done. This one took AWHILE to finish because it was 341 pieces and a lot of them where very small. I spent a lot of time down on my hands and knees looking for a piece...
  8. Out feed / assembly table

    I have needed a out feed for my table saw for some time now. I also needed a assembly table but I am limited to the amount of space that I have in my shop. I also move around a lot so I had to build it to be able to be taken apart for ease of move. I spent some time looking for a bench that...
  9. Started months ago just finished it today. Cigar box guitar

    I started this guitar months ago but it sat around unfinished. I decided to wrap it up today. Its a short version with a poplar neck with padauk inlaid into it. It has frets to scale for its size. Its a 4 string and it feels really solid which is different from others i have seen, they...
  10. North Pole Mailbox

    Thanks to Steve at Woodworking for Mere Mortals I made this wonderful mailbox for the children. His plans are great as well as the video's he produces. I'll make more for next year.
  11. Home made Disc Sander

    I wanted a way to sand outside corners smoothly and quickly. Looking through one of Danny Proulx's books I came across his plans for this DIY version. Went scrounging at my local machine repair shop for a used motor with the right RPM and found one for a bargain price. Everything else is 3/4"...
  12. Cutting board of bog oak

    Friends are greetings to all, today I want to bring to your attention my new project. This is a kitchen cutting board that I made from bog oak and ash inserts, at the end I covered it with oil Festool
  13. Dovetail and Carved Candle Box

    So I made a box for my wife a while back and everyone kept asking how I made it so I thought I would make a second one slightly differently and show what all went into making this small Dovetailed Candle Box. Here is the full Build video on this box!
  14. Night stand

    Night stand made from cherry did a dado and rabbit joint for the case joinery and biscuit joined the top hop my post worked I'm new to woodworking a d would like to hear feed back from the vets that's helpful always a pleasure to talk to pros and learn 3 parts base and cabinet used a kreg joiner...
  15. Another cutting board

    Another cutting board, but this time for my brother's birthday. Made from walnut and maple with a salad bowl finish. And yet another shameless plug for my cutting board program. :) http://lumberjocks.com/projects/11372
  16. Hand made semi hollow longboard skateboard

    I make these semi hollow boards, they are hand shaped and built completely from scratch. The boards are designed to feel more like a surfboard than the bendy cruisers that are out there. The designs are all original and double as art and grip, whether barefoot or wearing shoes. hope you like!
  17. Restoration of the desk

    Hello. Today I want to share my new project. The customer asked me to restore the table. That's what I finally got.
  18. baby block

    A baby block I made for my newest nephew for Christmas. I got the Idea form fellow Lumberjock, High Rock Woodworking. The woods used are padauk, maple, and lacewood. Thanks for looking!
1-20 of 500 Results
Top