LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 500 Results
  1. Fancy Wood Cane #027: Quilted Maple & Claro Black Walnut

    This is one of my favorites. I found some really nice quilted maple and decided it needed to be a 3 Dimensional piece to show off the illumination. This was one time the wood really spoke out to me and insisted that it had more potential than as a flat surfaced object. One can spend hours...
  2. Marking Knife

    This is my marking knife. I used black walnut for the handle and added some brass inlays at the end of the handle. I used a brass fitting for the ferrule to finish it off. For the blade i traced out my design on a old table saw blade the cut it out with my angle grinder. Iv made a Youtube video...
  3. Walnut table

    3 inch thick live edge Black Walnut table with custom steel 4inch x 1/2 inch flat bar base.
  4. Backgammon Board

    Well I joined LUMBERjocks about a year ago, then I tried to make a project. Last year my project was to build my workshop, it takes me along time since I work full time I selected a Backgammon board, because I like the game. Since I had no plan or board of this size 30.5 by 22 inches the...
  5. Fancy Cane #029: Claro Black Walnut & Figured Cherry

    This is a more conservative combination of woods. It's one of the more simple combinations of wood that I've done, but I've shaped the handle to be as ergonomic as possible and with some nice design to it to give the user a sense of style. (I am trying to abolish those ugly aluminum and simple...
  6. Router bowls

    All of these bowls were made using a router, bandsaw, drill press and sander. Some of the wood was recovered from downed trees from a local forest fire. Small projects squeezed in around work and home. Picture 2 - 7" x 2 ½" Redwood with wipe on poly Picture 3 - 2 ½" x 5" Alder (stacked fall...
  7. Walnut End Grain Cheese Block

    I normally saw lumber and build furniture, but I got in the shop recently and built some little odds and ends that I had been wanting to make for a while. I've already listed my tortilla press, but here is an end grain block I made as well. I really like the contrast of the white sapwood with...
  8. first box

    Made a Xmas present for the Mrs. Stared on this project almost two months ago, only can work on it a few minutes here and there… I have learned several new curse words in the process lol, but it was a fun project. Im new to woodworking, I have actually spent more time restoring old machines...
  9. Serving Tray

    I designed and built this serving tray as a wedding gift for a co-worker and his lovely bride. Built from birds eye maple and black walnut. Box joinery holds it all together and the handles have black walnut on the bottom and two sides. Finished with several coats of shellac and polyurethane...
  10. Tumbling Block Boards

    These are a couple more Tumbling Block boards I recently finished. The circular one is my first prototype of one like that. They are made from the same combination of Hard Maple, Cherry, and Black Walnut. This time around I made a little jig for gluing these together in rows. I'll try and...
  11. Vase

    Segmented vase made of a solid black walnut bottom, semented curly hard maple lower, upper and funnel and the middle is segmented figured black walnut.
  12. Roubo Style Try Square

    Modelled after Chris Schwartz's rendition of the Andre Rouble try square. An exotic for the body (forgot what it was) and black walnut blade with a ogee and cavetto to fancy it up. A mortise and tenon and a half for strength. A worthwhile project. I find myself making more tools these days...
  13. "My Tell-Tale Heart"

    "My Tell-Tale Heart" box series was designed and created to celebrate my younger brother's wedding. Right from the start I knew I wanted to make them a special box. They got married on Halloween which was a big influence on the design. Taken from one the most famous pieces of gothic...
  14. Black Walnut Platters

    One of the reasons I upgraded my lathe last November was to be able to turn larger bowls and platters. I recently purchased a large quantity of Black Walnut from a gentleman moving out of the area. The last picture was the experiment, getting down the process since I'd never done a platter...
  15. Picture Frame

    Black walnut and spalted birch frame.
  16. Smoke

    Another ArtBox. This one started out with 3/4" Walnut lumber x 36" long which I cut to width (3.25") and then cut a recess for the Myrtlewood panel that wraps around the middle (about 3/8" deep x 2" wide). After that dried, I cut a kerf for the 1/4" ply bottom and then mitered the pieces. I...
    box
  17. aluminum foot locker w black walnut and copper stitching

    Here is my latest project-nothing special, just made a lid for an old aluminum tote I picked up at an auction for $11. It had a ratty plywood top which I wanted to keep, but was just too far gone and pretty plain, but the underside was cool so instead I turned it upside down and jammed it into...
  18. Figured walnut box 1

    This piece of walnut was striking. I featured an amazing pattern going from heart wood to sap wood and its infested with ripples and curls! The top of the box even has some live edge characteristics to it. The handle was made of purple heart
  19. Stickley #72 Magazine Cabinet

    I have limited time and needed to build a small book stand for our house. There are 2 style you can't go wrong with and they are Arts & Crafts or Shaker. I thought the Stickley #72 Magazine Stand would fit the bill perfectly. The original actually had an arch at the bottom of the side panel but...
1-19 of 500 Results
Top