LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 183 Results
  1. Large Shoe Holder

    Hello all! This was the second project i have completed! This shoe holder i made per the request of a local community center. I got the design idea while searching the web although i cant remember where at the moment. It was constructed of birch plywood, melamine, and maple for the face...
  2. Toy Box for my Grand-daughter

    Just completed this toy box I made for my 1 year old grand-daughter. It is made with red western cedar and birch plywood. The cedar parts are held together with glue and pocket screws with the ply panels floating in grooves. It measures 30" long by 18" deep by 16" tall, under the lid. It was...
  3. New Work Table

    This is my latest workbench it was built using 2×4's, knotted pine, 3/4" birch and 1/4" luan plywood. The next step is put in some draws and mount some vises.
  4. Bell ornaments

    I used birch plywood and Keith Fenton's pattern to scroll these bells. I painted them using a gold metallic paint from DecoArt and added rhinestones from Rhinestone Canada. Thanks for looking
  5. Safety Equipment Storage

    I have been thinking about this for a while and finally took a break from making Christmas presents to build a storage box for my safety glasses that is right in the shop area. I used to drop them in the drawer with the sanders and had to wipe them off all the time. While I was at it, I added...
  6. Glass top tray

    Here is a commissioned glass top tray that my wife, Jill and I recently completed. My wife did the pyrography on 1/4 inch birch plywood and I made to tray out of Maple.
  7. Baby storage bench

    This bench was primarily built as a storage solution for baby stuff. I really like the concept because it should continue to serve our needs beyond the toddler years. It's built primarily from birch plywood with poplar face frame and trim. I ordered all the baskets first and then designed based...
  8. Dutch Tool Chest

    I made this chest based off of the Dutch Tool Chest design. The case itself is made of Birch Plywood, with the lid and drop front panel made of white spruce. The case sides/back/ and shelves are joined with dados and cut nails. Strap hinges for the lid were ordered from Lee Valley along with the...
  9. WINE BOTTLE AND GLASSES BOX

    Boxes are 30×30x37 cm, made of 13mm glued oak boards. Front side is 10mm birch plywood made as sliding door upowards, along groove on sides and bottom. Inside compartments were also made of 10mm birch plywood with 8mm sponge as absorption. I glued sides with dovels. It accomodates two bottles -...
  10. Media shelf

    My friend asked me if I could build him a shelf for under his tv I said sure what size he says 80". I laughed at first then said sure no problem, I will design something just give me the measurements of all your devices that will go in it. His wife wanted to put some baskets in it also so this...
  11. Shop Stool

    With inspiration from Sailor's recent project (http://lumberjocks.com/Sailor), I built my own shop stool. Luckily, I'm also working on a new bathroom vanity, so I just added a half sheet of birch 3/4 to my shopping list. Despite the need for more practice cutting circles with a jig saw, I'm...
  12. Locker shelf organizer

    This one made of birch plywood, maple face, padauk.
  13. Locker shelf organizer

    Birch plywood case, leopard wood face, butternut trays.
  14. My first bookshelf--lessons learned

    This was my first major piece of furniture. The only power tools I had were a circular saw, a cordless drill, and a palm sander. It lived in my office unfinished for several months because I ran out of time before finishing it. I wanted to post it only because it reminds me how much I have...
  15. chisel boxes

    I got this set of Ashley Isles chisels off the sawmill creek classified section. The first box has chisels from 1/8" up to 1" by 1/8" increments. The big box has 1 1/4" 1 1/2" and 2" chisels in them. The small box is made of pine and I alternated the chisels vertically to make the box smaller. I...
  16. The Herd

    Getting ready for a holiday-themed craft show … these can either be stand-up displays, or be hung on the wall. They are cut from 1/2" and 1/4" birch plywood, and stand about 9" high. Finish is rattle-can acrylic. These are not my original design … the pattern was authored by Steve Good, and...
  17. Toy Chest with Veneer Panel Inserts

    Walnut Toy Chest with arched rails, molding and veneer panel inserts. We first built a shelf board mock-up to determine rail arcs and veneer panel sizes. We used our neighbors full size CNC router to produce MDF templates for the various arcs. The MDF templates were used to create fixtures...
  18. Gas Pump Curio Cabinet

    These were built from a pattern for a lady that I work with. I've been working on these for a couple of months in between other projects for our business. I have to say that they were a little bit of a challenge being that the pattern and directions weren't very informative. If somebody didn't...
  19. Bathroom vanity

    This is another project that has taken years to complete. Like most of my projects, they are in my head and on my to-do list for a long time before I even start them. I finally started it this past summer and completed it around Thanksgiving. We finished the bathroom remodel and installation...
  20. Wood Whisperer Inspired : ASSEMBLY TABLE

    Hi Fellow Lumberjocks, Sorry I have not been on in a while as I have been back to working full time and I am not the man of leasure anymore lol… I have been working on this new assembly table for about 6 weeks now and I am glad to say that it is finally finished. I have just finished a new...
41-60 of 183 Results
Top