LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 183 Results
  1. Garage Storage Solution

    Finally worked on the back wall of the garage / workshop. As you can see from the picture, it really needed some organization. After seeing the cabinets that Guido Henn built (Chaos Theory Cabinets), I knew I was going to have to do something similar. I really love the way they turned out and...
  2. BIRDHOUSES

    These 3 birdhouses these are all in a lighthouse fashion with a solar light on top of each one. The big red Holland Lighthouse in the last photo has a 6 volt battery and a car flasher inside to make the solar light blink on and off about once every 20 seconds. This is one for show only, I don't...
  3. Display Stand

    Customer wanted stability and portability. From carrying case to finished assembly takes 4 minutes. Pic #6 shows happy customer. So happy that he ordered another one of these AND 3 other types. Maybe I'll post the others after they're built. I understand all these displays will be at the...
  4. Painted Hood

    This range hood is made from Maple lumber and Birch plywood. It is approximately 60" wide X 24" deep X 66" tall. It has 2 pullout spice racks on each side. All of the onlays, corbels, and sea shell were carved by a carver in our shop. The hood liner for this hood is a ventless hood. Therefore I...
  5. Fireplace mantle

    I designed and built this for my friends are new house, Made of solid poplar and some birch plywood for the inside of the boxes, All the trim (except the crown) inside the boxes, under the crown, etc. I custom made with my favorite router bit (I forget what its called) Sanded, Primed, Sanded...
  6. The Kids Needed a Kitchen

    My Woodbuddies daughter and her husband bought a starter home. The kitchen was in terrible shape so her dad and others went to work designing, manufacturing and installing. The entire kitchen area is in cherry based on the 32mm system.
  7. Grandson's Bedroom Furniture

    Chest of Drawers, Dresser & Changing table with removable top frame. I couldn't find feet that I liked so I went to a local woodworker's / crafter's supply & bought a dozen little wooden "Snowmen" to use as feet. The furniture is made of pine, birch plywod & the sides are wainscoting. I also...
  8. Matching Book Shelves

    My lumberjock brother and I made this book shelf unit to match existing book shelf. Used birch plywood and popular. Owner will paint and hang doors.
  9. Battery & Battery Charger Cabinet

    Cordless Tool Battery and Charger Shop Storage Cabinet I.Problems: A. No central location for battery chargers or batteries placed around shop on counters and benches. B. Wood dust on and in chargers. C. Remembering to keep batteries charged. D. Remembering to not leave batteries on...
  10. Bluebird House

    This was made from scraps from another project I am working on. The parts are all birch plywood and made a awning type trim for the top. Having now about 15 different ones just hanging around its time to start putting some out or even try to sell a few. I have had people ask me if I would make...
  11. sticking board

    I should have made this or something like it a long time ago. Birch ply for the base, maple for the fence, and some pine to use as stand offs to build the base up. Mystery wood as end caps to protect the ends. I make a lot of boxes and it's difficult to clamp small pieces on the bench and work...
  12. Contemporary Reclaimed Barn Wood Sliding Door

    Here's a recent build I did using different barn woods from our lot. The customer picked out all of the different pieces at the lot and then I ripped them, jointed the back side, and brad-nailed/adhered them to the birch plywood. when it was fully assembled, our finish guy did a great lacquer...
  13. Knock Down Assembly Platform

    I needed an assembly platform for the shop but space, as always, was at a premium. There was not enough real estate for a fixed unit so I devised one that knocks down for easy storage. The platform is 36" x 36" and sits 18" high. It will be used for assembling chairs and casework. The top...
  14. Birch plywood w/ walnut bowl

    This is my first bowl. It is made out of Birch plywood with walnut for the top and bottom rim.
  15. Sign for Christmas...

    Here's a fun little sign I did for my in-laws. They just did a huge rebuild/remodel after being flooded. They were part of the big floods in Cedar Rapids, IA. I wanted to give them something that they could put on their new and improved home that should be finished sometime early this next year...
  16. Recycled Wall Cabinet

    When my house was built, I ended up with an extra cabinet front (the builder had installed the front where the dishwasher would eventually go). I kept the front and thought about building an additional cabinet with it to match the rest of the kitchen. This is what I came up with… I had to...
  17. miter saw station

    finally finished my ms station about 6 weeks ago after working and half way planning on it for 8 months. the left side just made shelves to hold my scrollsaw,bench grinder,sander and assorted tool cases.the right side i made a couple deep drawers to hold various junk and underneath i've got...
  18. clamp racks

    FINALLY!!!! i built some clamp racks.i've been i guess i would say intimidated by building these for some reason but after i watched a video by fellow lj @Rock-n H woodshop i decided to try it.i went by alot of how he did it and then adapted the rest to meet my needs.they are not perfect but...
  19. Arts and Crafts Bookcase

    I finished this in December 12'. It's a design of my own made using Birch plywood for the body and basic clear pine for the face frames. The shelves are also birch ply with a pine front stripped attached with glue. The top is a glue up of some 5/4 pine. The case is held together with simple...
  20. corner stemware w/ shelf

    built this stemware rack for a friend at work, and 4 shelves. this is to be the beginning of his bar in his home. next to build is a bar. each step is done a little at a time. this is cost effective for him. mirrors will be added between the shelf and rack
1-20 of 183 Results
Top