LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Moxon Vise Benchtop Bench

    Hello my friends !, after finishing this work, I present here my project of a Moxon Vise Benchtop Bench. It was built using only hand tools at all steps. The entire project was documented with specific details, in three entries here in my blog with explanations and pictures, and in turn these...
  2. Benchtop Workbench

    I need a traditional woodworking bench with all the bells and whistles but cant afford it at this moment in time perhaps the lottery can help out at some point in the near future. LOL What I do need is a clamping solution other than the Jay Bates inspired Moxon Vise that I made a little while...
  3. Benchtop Bench - got tired of back pain... Post

    Benchtop bench got tired of back pain… When I was sawing finger or dovetail joints on my traditional Scandinavian workbench, I always ended up standing in a bed over position sawing. Since I am retired du to a neck operation this is especially for me no good. So when I realized I had to cut a...
  4. Benchtop Bench

    Inspired by "Fine Woodworking" magazine's version. Top is made of cherry flooring and a douglas fir 4" x 6". Legs and vise jaws made from juniper. Top measure 12" x 24.75" x 2.25" and the dog holes are 3/4". Finished with boiled linseed oil. This bench will raise my work off the bench about...
  5. Jeff Miller’s – “A Benchtop Bench”

    I suppose the main reason I wanted to build this mini-bench was to finally have access to a Moxon style twin screw vise. I'm hopeful that it will be useful for many types of up close work for cutting dove tails to carving and marquetry. This project was quite inexpensive to make using veneer...
  6. Benchtop bench

    I assume that I got this idea from Woodsmith Shop, but I can't remember. Could try to figure that out if anyone's interested. While the execution came out just fine and I was glad to be able to use the extra vise that I had hanging around doing nothing, I would change the design next time...
  7. A Benchtop Bench

    I made this bench top bench from plans from the March/April 2005 issue of Fine Woodworking. Since I only had enough 8/4 Maple for the vice I made the frame from 3/4" Maple and face glued all the pieces. I also used some scrap Brazilian Cherry for the end frames. Although not shown, I made a...
  8. Blogs
    Steve Latta's Mini Bench Plan With my sore back, I needed a solution when working at my workbench. Clamping a mini-bench seems like a good step to take. Of the plans I have seen I like Steve Latta's miniature bench that was presented in Fine Woodworking Magazine. I bought the plan and...
  9. Blogs
    Inspiration I very much need to upgrade my current clamping solutions in the shop as my Jay Bates inspired Moxon Vise just isn't cutting it, I cant work on all face of the workpiece like you can on a traditional Woodworking Woodbench which currently isn't in the budget. I just wanted to say...
  10. Blogs
    Benchtop Bench - got tired of back pain... Blog Benchtop bench got tired of back pain… When I was sawing finger or dovetail joints on my traditional Scandinavian workbench, I always ended up standing in a bed over position sawing. Since I am retired du to a neck operation this is especially...
  11. Blogs
    Make a Moxon Benchtop Bench - Part 1 Hello everyone ! Today I share with you the first part of making a Moxon Benchtop bench. This is a project in process, done exclusively with hand tools from the beginning to the end, whose objective is to have a solid and transportable bench, to use...
  12. Blogs
    Make a Moxon Benchtop Bench - Part 2 Hello everyone! In this second part of the built of my Moxon benchtop bench, I share with you the gluing of the parts, the beveling of dog holes using a gouge, the shaped of the fixing lugs, the placement of the threaded rods, and the built of the front...
  13. Blogs
    Moxon Benchtop Bench - Part 3 - End Hello everyone ! This is the third and last part of the built of my Moxon benchtop bench (a Moxon vise benchtop bench). Today I share with you the making of the handles and the finishing. To make the handles I considered to embed the nuts in a floral shape...
1-13 of 13 Results
Top