LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Projects Simple oak bed

    Simple design, but it took some figuring out to a) fit all the floating tenons and assembly-hardware in those uprights, and b) do it so that the wood movement issue will affect the minimum width for both the sides and the ends.
  2. Projects Beech bed

    Buildt a new bed to my daughter. She wanted a clean look l without any fancy joinery. So no draw bore joints or dowtails. Just plain and easy. The design also is for a bed head, but that is under evaluation.
  3. Projects Bed and Matching Nightstands

    This was made for our daughter and her husband. She wanted a headboard that showed wood grain in a ‘V’ pattern. After looking at various wood options she settled on ash. I bought rough lumber and milled it to dimension including cutting tongue and groove for all the angled pieces of the...
  4. Projects PET's BED

    70x50x16cm , 20mm slats, firwood pet's bed. Corners were dovel glued, bottom slats srewed. Name of pet (dog) cut out of mahogany with scrollsaw. Finish non glossy laquer.
  5. Projects Cherry platform bed

    This is my fourth bed build, and the third one of my own design. I have got beautiful 9" wide, 4/4" thick cherry boards with very nice grain, and started building around that. As you can see, I love cloud lift detail and use it everywhere :) All permanent joinery is made with floating tenons...
  6. Projects Penguin Inlay Medallion for Headboard

    When I built my granddaughter's convertible crib in 2019 (delivered the day she was born), I embedded a replaceable teddy bear inlay medallion in the headboard, thinking I could update the bed with something age appropriate as she grew. Well, years passed, and just as she moved from crib to...
  7. bunk bed

    Bunk beds built from planed 2×4's for a "knotty pine look" (i.e. #2 & better Douglas fir 2×4's). head boards and foot boards are all frame and panel and mortise and tennon construction. Built for some friends - they finished it with a very light stain and rub on poly.
  8. Mahogany Carved Twin Bed

    Ladies and gentlemen, This project was born somewhere at the local IKEA. I realized there that I wanted a simple and practical bed with the feel of beautiful real wood, chopped, carved, and finished myself. Here it is: Honduras mahogany - I didn't want to spend time working on a cheap...
  9. Kid bed and desk

    Hi, this is a simple kid bed with a play area under it. It is made of birch plywood using kreg k4 jig. The customer wanted it to be built with wall support. The little desk that match is made of the same material. I use the kerf bending technique for the round corner for the first time. It's...
    bed
  10. Doll Bed

    I had a great student in my Second grade class last year. When her mother asked me to make a doll bed for her, for Christmas this year, I gave it a try. I have boys, so this is a new area for me. I used Aromatic Cedar for the rails, Giant Sequoia Redwood for the posts, and 1/4" Cherry plywood...
    bed
  11. Bunk Beds

    Bunk beds for my girls. Made of maple. I built up the the bed posts from several thicknesses of 3/4" maple to get the thickness. The head boards and foot boards are all frame and panel and mortise & tennon construction. the stairs are made from 1/2" plywood with locking rabbit joints to build...
  12. A Doll Crib For Caite

    My latest project is a doll crib for my granddaughter Caite. Yes it is made from Pine. All the joints are hand cut mortise and tenon (proud joints) The storage drawer is has hand cut dovetails. My wife is currently making the mattress and 2 blankets.
  13. Loft bed

    Loft bed The appartment we have here dates back to the 19th century and has a very nice ceiling height of ~ 3.7 m. Thus, there is plenty of room for a loft bed. The concept was to include a real (if steep 'n narrow) stair case instead of a ladder and to provide as much storage as possible by...
    bed
  14. twin bed

    this is twin bed I have been build for my niece over the last 8 months. It started out as just a bed with the three large drawer in the base and then was decide it need a head board to look finished and then came the foot board with spice racks built in for her nail polish and the fold down...
  15. Buzz Light year big boy bed.

    Had to get rid of the baby bed and upgrade to a spaceship with a mattres. Realy simple to build , some 4×4s, 2×6s and a half sheet of project wood. The little one and wiffey even helped paint it witch was a lot of fun and verry messy job.
  16. "Guardians" Twin Log Bed

    This is a twin size log bed made from Eastern White Cedar. The headboard and footboard upright posts are 5"-6" diameter, the spindle are 3" dia. and the rest of the rails and crossmembers are 4" dia.. 2" x 2" Tenon and mortise as well as pocket hole joinery was used thoughout. I added a strip...
  17. Doll Beds with Trundles

    A friend at church asked if I could make doll beds for her grandaughters this Christmas. I oblidged and got a third order from a friend at work. This was a successful use of mortise and tenon joints made with the table saw sled (tenons) and a forstner bit (mortises). I enjoyed routing the...
  18. Easy to build, Window Bed for Cat

    My cat likes to look out the window. He normally jumps up on my nightstand, but knocks everything of when he jumps up there. So I built this stand/bed for my cat. It has a old blanket on top of it, so it also can be used as a bed for a cat. Its made out of 3/4'' Pine, and 1' wood screws to hold...
  19. Toddler Bed

    This is the first piece of furniture that I have made, since high school. I made the toddler bed for my two year old son. The wood is walnut and the finish is 3 or 4 coats of a simple wipe-on poly. I made this bed, while we still lived in Cincinnati, OH. This bed was made while I was taking...
1-20 of 500 Results
Top