LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. Wall Art

    Basic wall art from reclaimed barnwood and beadboard from a California pig farm. I'm still having trouble with my 45's in the corners. But live and learn.
  2. Kitchen corner bench for a nook

    This is a corner bench for a clients kitchen nook, they wanted one that did not have a corner section since they do not have alot of room. Making without the 45 degree section proved to be a little trickier than I thought. I huess this is why you can't buy one without one. John Visit my blog...
  3. Completed kitchen Nook with table....

    For more detail visit: http://7kcraftsman.blogspot.com/ Dont mind all the dusty handprints…..... John
  4. Bungalow Style Kitchen Cabinet

    I detailed the construction of this kitchen cabinet extensively in my blog However, I never posted it as a project. Materials: Faceframe, doors, and drawers: Recycled Douglas Fir resawn from old house beams Carcasse: Vertical Grain Fir Plywood. Brass hardware and all Slotted Screws...
  5. Linen Cabinet Built-In

    June 2010 - Poplar/Pine/MDF - 30"w X 84"t X 18"d
  6. Spice Cabinet

    This is a Christmas present which I made for my son and daughter-in-law. He wanted something like the one I made for our home, except bigger. The sides and door frames are made from poplar. The door panels and inside back is beadboard plywood. Thanks for looking.
  7. Scrapbook Desk

    I designed this desk for my wife for her Cricut scrapbooking supply. If you're not familiar with a Cricut machine, it's similar to an ink jet printer or small plotter, but uses a cutting knife instead of ink. The machine uses plug-in cartridges that typically include several themed patterns or...
  8. Bench

    This is a bench that I built as an anniversary present for my wife. She mentioned that she would like to have a place to store the kids toys on the screened porch. So I surprised her by building this while she was away with her family. It is made up of 3/4" sandply, beadboard, and pine...
  9. Prototype Daybed | Custom

    This is a daybed that was built strictly as a prototype. I don't normally build prototypes but wanted the customer to see a design that I was thinking of and since there were several identical beds in this same order, I figured I should make sure it is right. This customer had a design in...
  10. Kid Room Furniture: White Shelf and Bed

    Made from Poplar and beadboard. Finished with white paint. I made the bed and shelf frames from poplar using mortise and tennon joints. The inset panels are made from bead board (beads are visible on both sides). Lower portion of shelf (both sides) hinge out on piano hinges and function as...
  11. Bead Board paneling and Wainscoting for the new baby's room.

    Being a new father really keeps you busy. So busy that I'm just getting around to posting this and we recently celebrated my daughter's first birthday. While we were expexting, my wife and I discussed building a built in dresser / changing table cabinet system, but the room was already small...
  12. Bookcase / Hall Tree??

    This is a bookcase/hall tree for a clients home in the Rocky Mountains. It is entirely made of Alder and has a glazed finish. you can read more at http://7kcraftsman.blogspot.com/2007/12/bookcase-hall-tree.html John
  13. "Beadboard" hamper for the kids room

    Paint dried on this and I finally got to attach the lid. I started this hamper for my kids' room a few weeks back. I bought the frame and panel materials but scrounged my scrap for supporting cleats and the lid. I'd been holding on to "Netherland Bulb" boards for a couple years having ripped...
  14. Headboard from reclaimed Oak

    This is my first "real" woodworking project. We already have a nice bed, however, being a sleigh bed, it doesn't fit well in our bedroom so we needed a headboard that fit flat against the wall (and no footboard). The most interesting part of the project is that the wood came from our pre-1900...
  15. Large Segmented Bowl

    I made this bowl as a gift for my wife's 50th birthday. It is made of curly maple, walnut, cherry, and black veneer. It contains a total of 230 pieces and it 10" OD and just under 10" in height with the lid. Finish is shellac as a sealer and then spray gloss lacquer. This has been my largest...
  16. A Distressed Wall | Entertainment Center

    This is a custom wall system. It is built similar to an entertainment center, but this one will be used for just storage. A few thing to note that I did on this project. The first is the pocket doors and adjustable shelves combination. Normally the recess movement pocket doors interfere...
  17. Adding Kitchen space using less space.

    This is a kitchen wall that worked on over the summer and finished last Sept. (I work at my own pace=slow!!) In my quest to make the most of space available, this kitchen wall shows some interesting adaptations, if one is willing to step outside the normal. Problem was that the area was...
  18. Stuffed Animal Toy Storage

    This is a fun project for my 2.5 year old daughter's room, to help cleanup the house pre imminent (any hour now!) baby girl number 2. :) It has a poplar frame, and a beadboard back panel. It has bungee cord 'bars' that run top to bottom, fastened in the middle. The back is set in dado's, and...
  19. Finishing
    Has anyone ever used 1/4" cherry beadboard w/MDF core as the panel insert for kitchen or bathroom cabinet doors? I was planning to use it for bathroom cabinets but am concerned about how the beadboard will look when it is stained and lacquered since the MDF actually shows in the grooves on the...
  20. Woodturning
    Hi all, I have the HF Mini lathe (http://www.harborfreight.com/8-inch-x-12-inch-bench-top-wood-lathe-95607.html) and in my time owning it for 3 years have broken the tool rest on it twice, in the same way. I get a catch and it snaps the crossbar from the post on the tool rest. Unfortunately, HF...
1-20 of 31 Results
Top