LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Bandsaw Fence

    The original design is from the Oct 1974 issue of Popular Mechanics, article by Paul Fiebach. He designed the fence for a small 3 wheel bandsaw with a plywood table. Many of these old plans are sketches of an idea after the fact, calling them plans is overly generous as they were meant to...
  2. Bandsaw resaw fence - (post)

    Bandsaw resaw fence Quick and dirty. Hi LJ's. Here a quick and dirty bandsaw resawing fence. You can read more in the blog: https://www.lumberjocks.com/mafe/blog/130837 Pictures: 1. Resawing. 2. Simple parts. 3. Fence edge. 4. Putting it together. 5. Fence clamped to bandsaw. 6. Long board...
  3. Making a $50 or less Band Saw Fence

    I don't know about you but having a fence on my band saw is one of those must have accessories. I recently got a Porter Cable 14 inch band saw and to be honest I love the saw but was very frustrated that it did not come with a fence from the factory. Yes there are options like the Kreg fence...
  4. Jigs & Fixtures
    nothing to special but definitely needed a resaw fence for the craftsman …also installed the clip on light hooked into power box so when switch is on so is the light :<))
  5. Blogs
    The Laguna Driftmaster Fence System Well I went ahead and did it. A woodworking e-mail blog stated that Laguna Driftmaster fence system for cutting veneers and I went to their web site and viewed the video. I've cut veneers and thin strips of wood before, but never with a lot of accuracy. The...
  6. Blogs
    Shop Air Nearing the finish up upgrading workshop with a compressed air system. Got a Husky 33 Gallon air compressor with (2) 50 ft. hoses last year thinking that would do while I figured out plumbing the shop. The past few months I've been installing hose reels and using the Rapidair garage...
  7. Blogs
    Making the rails and gluing up the fence. You can also follow along on Instagram. My fence will be adapted from the the bandsaw fence built by Paul Fiebach, published in the Oct 1974 Popular Mechanics. Calling this a "plan" is generous. Like many old "plans", it is just a sketch, an idea...
  8. Blogs
    Moving on to the Bandsaw Table I'm nearly done with the drill press table, but am stalled waiting on some t-track for the fence. It will be here sometime next week. So I have jumped into the next project: A table for my Ridgid Bandsaw. Here's a BEFORE shot: I am using some phenolic coated...
  9. Blogs
    Bandsaw resaw fence - Quick and dirty Bandsaw resaw fence Quick and dirty. Hi, Here a little project for resawing on the bandsaw. A quick and dirty fence, that allows you to saw thin cuts and support from bottom to top of the wood. I see a lot online about this and some say it's all about...
1-10 of 10 Results
Top