LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Maloof inspired Guitar Picking' stool

    First attempt at a Maloof inspired, power carved piece. Kiln dried 8/4 Oregon Black Walnut from a local mill. Black epoxy to stabilize the knot. Original Tightbond. Arbortech Power Carver with Turboplane for power carving. Sanded to 600 and finished with Odie's Oil. First time using Odie's...
  2. oh look Wood Flags

    For your enjoyment is a collection of some of my Carved wood Flags. I wish I had more time dedicated to making these things. The first two are smaller i call them Desk flags and are about 12×21 and the larger two are roughly 22×40. They are individual strips clamped together then carved. They...
  3. Sanding Disc Jig

    Several in our local turning club use the Arbortech Contour Sander. For those not familiar with it, this device turns a standard angle grinder into a random orbit sander with a 50mm rubber backing pad that can be used with PSA sanding discs. The Arbortech is a terrific device, but I haven't...
  4. Finishing
    I sanded the interior of this tray with my Arbortech Contour sander to 220 grit. This is the first time I used this tool. I then stained the piece and as you can see in the pic I got lots of swirl marks and what I call "pig tails". Can anyone tell me why this is happened? I wiped the same area...
  5. Power Tools, Hardware and Accessories
    Does anyone know of a source for self adhesive 2" sanding discs for the Arbortech Contour Sander? The black screw in the middle of the OEM disc is a nuisance. I keep hitting it on the work piece, causing little "pig tails" I then have to sand out.
  6. Off Topic Coffee Lounge
    The design company is looking for someone to make them. -Jack
1-6 of 6 Results