LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 98 Results
  1. Gun Stock Carving: Walnut Stock Carved with a Wildlife Scene, Flying Ring Necked Pheasant & Oak Leaf

    This was a commissioned project. This gun was the third and final part of a set of guns I did for a family in Wichita, Kansas. You can see the Quail Carving by clicking here You can see the Tom Turkey Carving by clicking here If you have a gunstock that you would like to have...
  2. Native American Flutes

    I have been carving and playing Native American flutes for some time now. this one I carve from a salvaged piece of Douglas fir while I was recovering from back surgery. I like carving different bird heads on the ends of my flutes, but the eagle seems to be everyone favorite. I use cedar and...
  3. Commissioned Stands

    Here are a couple of commissioned name plate stands I recently finished. I made these for the same person this one was made for. She liked hers so much that she requested two more and has recently ordered a third. I like to make them a little oversized so they also add a decorative element to an...
  4. Mystery Wood - Trying to identify

    I've made two turnings from this wood that was salvaged from a friends, neighbors, firewood pile. He had collected many blocks of similar size from a local central Indiana lumber mill, although I don't know which one. Also in the pile were many blocks of red and white Oak. These are lighter in...
  5. Live Edge Walnut Slab Desk

    Hey Guys, I have been working out of that closet for a while now, and it was time to build myself a big boy desk, and I had to "do it big" as they say/ So I grabbed a GIANT American Black Walnut slab and well…waited. I knew I wanted a giant dovetail waterfall side, sort of inspired by Jimmy...
  6. Folk Art Walking Cane: American Indian Apache Chief Geronimo Carved Bust, Zebrawood, Malachite

    ------------------------------------------- This cane was commissioned and has been "SOLD" and shipped to Tampa, Florida USA. Cane Serial No.: #2009-12 Height 37" Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting...
  7. We Stand US Flag | CNC Project

    This week I made a Flag on my CNC router, "WE STAND". I was raised in School to stand for the flag, and National Anthem. With all the talk about certain Football players taking a knee during the National Anthem, I had to make this. It's made from White Pine wood and hand painted. We stand, if...
  8. Custom Hunting Skinning Knife Damascus Steel Atypical Deer Antler Elephant Ivory Scrimshaw Artwork

    This Custom Made Antler Handled Damascus Steel Knife was a bit of a challenge for me. The Atypical Antler set had a right handed, mostly normal looking deer antler, while the left side had a mostly straight tall "spike" antler. The customer on this shot the deer in Ohio in 2010, and found me...
  9. Native American Style Flute-Key of G

    This is my 10 flute since starting about 3 months ago. This is a wild cherry with a hand carved Cedar 'bird'. I created it by using my DVR-XP as a hold with a carriage mounted router to cut the excess wood away thus lessening the severe sideways sress/flex that can occur on a long hollow...
  10. Replacing a Carved Walnut Steinway Piano Cabriole Leg

    Project Story: This was a challenging and stressful project. Now that it is behind me, I can add this project to my list of odd, unique, and crazy items that I have tried to build over the years. Why the stress? First off, I wasn't completely sure that I was up to the challenge. I went to...
  11. Curved Tea light candle holder

    Here's a Maple tea light candle holder just in time for the season. It's 21" long, about 1 3/4 wide and 1 1/4" thick. It's one solid piece of wood. The top radius is about 24" and lower around 23". Used a 2" forstner bit and drilled 3/4 inch deep holes. They are spaced in from the edges 2 1/2"...
  12. End grain Black Walnut cutting board

    TexPenn is a Lumberjock who's been an inspiration for me and a while back he posted a cutting board made like this one. It took a while before I learned how to cut tiny rings and glue them into a log shape for an end grain cutting board. (big evil grin) Nope, it's just a 1 1/2" section of a...
  13. Nested American Chestnut

    American Chestnut Bowls - a friend commisioned a set of 4 nested, decorative/utility bowls. She left the choice of wood to me and I happened to have the good luck of coming across a downed American Chestnut tree. It had been down for quite some time and I turned around 8 bowls to get these four...
  14. It leaks!

    Sometimes you never know how a piece of wood will look until you start turning it. A couple of months ago I was driving through a neighborhood and saw that a tree service was taking down a large honey locust tree. The guys cutting the tree down not only gave me all the large pieces they even...
  15. FireSong Flutes #12

    This is a flute made by special request of someone who found out I make them. This is my first actual 'commissioned' and sold flute. It is Black Cherry with a hand carved 'campfire' bird made of Walnut with a Beech base and with burnt in details. I have chosen the campfire as my 'standard'...
  16. Carved Bishop's Crosier: Symbolic Story of the Holy Bible on a Shepherd's Staff For the Bishop

    ------------------------------------------ This project was a commissioned piece. If you would like something similar, please email at: [email protected] Photo 1: ------------------------------------------ Project Story: This carved Crosier (Shepherd's Staff) was commissioned by...
  17. Knife: Handforged Damascus Steel Blade, Deer Antler, Laser Engraved, Turquoise Inlay, Bison Leather

    --------------------------------- This knife was a commissioned piece, so it has been "SOLD" If you would like something similar made for you, please email me. Also, I often have knives for sale in my Etsy.com Shop, Click here to see what is currently available email: [email protected]
  18. Zebrawood Carved Folk-Art Walking Canes, Faces of Two Native American Historical Tribal Chiefs

    -------------------------------- This matched set of canes have been SOLD. If you like this style, you might also like to see a new Geronimo in Zebrawood Cane Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where...
  19. FireSong Flute #14--Native American style Flute

    This is a key of G, pentatonic tuning, 3/4" bore about 15" long, and 21" overall. It is steamed Beech with a cedar bird, my trademark bird, a 'campfire'. (Firefighter-Campfire-FIREsong-get it?;-) ) It has lambskin ties. Several coats of hand-rubbed lacquer for the finish. I made this one to...
  20. Custom Made Hunting Skinning Knife Damascus Steel Elk Antler Arizona Turquoise Stone Nugget

    It's been awhile since I posted a knife project, so I decided to update my project listings with another one. This month I made this knife for myself while I made another knife for a commission, but bills being what they are, I have decided to offer it for sale. I have built several new knives...
1-20 of 98 Results
Top