LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Drill Press Stand for 10" drill press

    This cabinet is based off the Drill Press Stand plans from Brad at FixThisBuildThat.com, which I purchased. I made a few changes, but this was my first time constructing a cabinet of any sort, as well as the first time installing drawers, and Brad's plans really helped me understand how the...
  2. Trivets

    I was gathering up some of the smaller pieces of wood to make room for some wood I just purchased when I remembered I need to go ahead and get started making up some of these. These decorative trivets are one of the most requested items for Christmas I have ever made. People like to get them...
  3. Poker Case Box

    Last year, I posted a request for a wooden Poker Case Box for my non-profit organization's upcoming Poker Tournament (fundraiser-April 2015). Tim Haenisch (Command Performance Wood Design), designed, and, built this for the event. It's quite beautiful, made out of California Oak. It has room...
  4. First Plane Project, inspired by Mafe!

    This is the first plane I have attempted. I got inspiration from Mafe, and his wonderful work. I had an old and dry piece of oak batten in the store doing nothing, so I thought I would try this. I rushed it, so it is a bit rough around the edges, and elsewhere! I didn't spend enough time...
  5. Bench Hooks.

    Here's some bench hooks I made today. I'm pretty pleased with how well they turned out! Can't wait to use 'em now… To see details of this project, click here. Thanks for looking!
  6. Joinery
    hello all, im a newbie here and thought i'd ask a silly question. here goes. I'm using the perennial porter cable 4216 dovetail jig and I'm having mixed results. some i can figure out and some i can't. here's one i can't. after cutting a joint in some panels for a project, i realized there was...
  7. Blogs
    Made the buy!!!! OK….. I pulled the trigger on the Porter Cable #4216 dovetail jig. I need it for the kitchen in the new house and I am up against a huge deadline. The few extra dollars I paid for this unit is for the templates included. Mini dovetails and box joints and a through dovetail and...
  8. Jigs & Fixtures
    I was reading the supplementary instruction manual for the Porter Cable 4200 series dovetail jig, and apparently you can use different bits. The jig comes with a 13/32" 7 degree bit, that produces a 3/8" depth of cut. This bit works well and makes strong, tight fitting dovetails. However the...
  9. Jigs & Fixtures
    I have long wanted to get deeper dovetails and a 14 degree angle with my PC 4210 jig. The bit that comes in the kit is 7 degrees, with a 3/8" depth of cut. The standard dovetails have such a shallow angle they almost look like box joints. After consulting the manual, I learned that when...
  10. Jigs & Fixtures
    Hello, I searched G for info on this but came up with nothing so I figure it's time to ask the experts. I broke out my PC 4210 last night to cut some box joints. Using the included manual as a guide all went smoothly on my test cuts. I then set the jig up for the Cherry pieces I wanted to...
1-10 of 10 Results
Top