LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 50 Results
  1. Endgrain cutting board

    I used various types of wood for my cutting board. I used some hard and some soft. I used cherry, pine, some cedar, just a bunch of different pieces. I took those long strips and cut them down to 20 inch pieces. I then took those pieces and glued and clamped them together. After they dried I...
  2. End grain cutting board

    In woods class we had to find different scraps of wood and cut them into strips the same size and glue them together to make designs with the wood. It is made out if 4 types of wood, oak, cedar, maple, quarter sawn white oak. I used semi-gloss finish because it makes it blend with whatever is...
  3. End grain cutting board

    I cut 20 inch strips of wood using the table saw. Then glued then together in a jagged pattern. Cut off any extra to make all sides the same length. then routed a rounded edge. And used mineral oil as a finish so that it would be safe to use as a cutting board. I used walnut and red oak to make...
  4. End-grain Cutting Board

    I used Walnut, Oak, Cherry, Maple, and some African wood called Bobinga. I found left over wood around the shop and cut them into stripes. All the same size and particularly above 20 inches so that I didn't have to glue more. I put mineral oil on mine so that I could actually use mine as a...
  5. Endgrain cutting board

    I used Walnut, oak, maple, cherry, and mahogany. I cut it into strips and I used wood glue to put them in the shape of a board. Then I cut it up and flipped every other peace around. Then glued it back up. Then I had to make sure it was level so I used a drum sander for that. Then after...
  6. End grain Cutting Board

    I made a cutting board for a school project. I started off by grabbing cherry, oak, walnut and maple and making them 20 inches in length and they had to equal 8 inches in width put together. Once I found all of my wood I glued them together and clamped them. I then trimmed the edges down and...
  7. Endgrain Cutting board

    I started off by cutting 24 inch long strips of walnut, cherry, oak, and maple into various widths. Then I glued all of the strips together and clamped them. After the glue was dried I took it out of the clamps and ran both sides through the planer until they were flat. Then I cross cut the...
  8. Cutting board

    The types of wood I used for my cutting board were Walnut, Cherry, Oak, Maple, and Ash. I made it first by finding the type of wood I wanted to use then I glued it all together. After that, I scraped the glue off then used the bandsaw to cut off all the extras from it. I used the drum-sander to...
  9. End grain cutting board

    The wood i used is oak, Mahogany, walnut, maple, cherry, and ash. I Picked out out all the wood. And cut the strips down to the size I wanted them to be. When they were all to size then I put the strips in a pattern and glued it all together. I then planed it flat and cut the board in to 1 1/4...
  10. End grain Cutting Board

    Types of wood used oak, cherry, maple, and walnut. How I made it was first I chose what kind of wood to use than I measured and cut the wood to size after that I glued the wood together than I cut the wood into strips and glued them together and finally I put mineral oil on it. I used mineral...
  11. Endgiraincutting board

    Walnut,cherry,maple ,woods Cut it up glowed ti up, then cut it up and then put mandrel oil .
  12. End Grain Cutting Board

    I started off by cutting 20 inch strips of walnut, cherry, oak, and maple into various widths. Then I glued all of the strips together and clamped them. After the glue dried I took it out of the clamps and ran both sides through the planer until they were flat. Then I cross cut the board into...
  13. Cutting board

    First I picked out the would I would use which I think all I used was cherry, walnut and oak. Then I cut them into strips then we glued this trips together in a pattern then I cut strips out of the pattern and rotated every other price 180 degrees and glued it together. Then I routed and glossed...
  14. Cutting board

    I used cherry and oak. First I found about 8 boards that were 20 inches long and then glued them together in a clam and let it dry overnight. Then I cut it it them the opposite way to get the pattern and glued it together in a clamp. We put mineral oil to protect against food.
  15. Cutting Board

    Just a cutting board made of oak, cherry, and walnut. I found some scrap and ripped them down to size, glued it and clamped it. Then I planed it to make sure the top surfaces were even. Then just chopped them up in more strips and glued it back together to make the pattern. Then it was just...
  16. Cutting board

    End grain cutting board Walnut, oak I picked scraps of walnut, cherry, and oak and I cut them into strips. Then, I glued them together and cut them into more strips and designed a pattern and glued it together. The finish I used was mineral oil. I used that finish because it seals the wood but...
  17. Box swap - Marquetry Box for jeffswildwood

    Here's the box that I made jeffswildwood for the box swap. I used a photo that I found online of Patos Island up in the San Juan Islands as the basis for this box. These islands to the north are home to 3 resident pods of Orcas and they swim up and down the Haro Strait between the San Juans and...
  18. End Grain Cutting Board

    I took some scrap wood and ripped it down and cut it to equal lengths. Then I glued them together, recut them the other way, and once again reglued. I sanded and finally applied mineral oil to make it sanitary for food.
  19. Walnut & Poplar Box with Copper - all reclaimed / salvaged materials

    This here is my main contribution to the 2014 Box Swap and it went to Clieb91. I also made another little box that went to his little girl, but I'll post that as another project. All materials in this box are reclaimed or salvaged. The box is made of black walnut and poplar, finished with...
  20. Step stool

    Made of poplar, it is not very big or very long(about 16 inches long).
1-20 of 50 Results
Top