LumberJocks

Making Two Sets of Matching Heirloom Saws

  • Advertise with us
Blog series by summerfi updated 02-14-2018 08:24 PM 2 parts 9813 reads 38 comments total

Part 1: The 10" Dovetail Saw

02-12-2016 02:20 AM by summerfi | 20 comments »

This blog entry is a continuation of an earlier blog post titled Making Two Sets of Heirloom Saws: The Gent's Saw and The Table Saw. The making of these saws is an ideal topic for a blog series, but I unfortunately didn’t think of that when I made the original post. I’ve now turned this into a series, but there is no way to go back and incorporate the original post into the series. That is why this post shows as #1 of the series even though it is about the third saws in the sets....

Read this entry »


Part 2: The 12" Carcase Saw

02-14-2018 08:24 PM by summerfi | 18 comments »

This is the third in a series of articles on making two matching sets of heirloom saws. The first article was on making gent’s saws and table saws. It can be found here:http://lumberjocks.com/summerfi/blog/46985.The second was on making 10” dovetail saws, and it can be found here:http://lumberjocks.com/summerfi/blog/78490.If you’re wondering what these sets are all about, please see the first article in the series where that is explained in detail. It has been two full years since I made th...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com