LumberJocks

stefang's Blog

  • Advertise with us
This blog is written by stefang | 241 entries so far

Latest Entry

HORN SPEAKERS #4: Marking and more Cutting

12-18-2019 04:54 PM by stefang | 14 comments »

This is one of the two 90% finished horns being made. Last time the square segments were marked out and cut into wedges according to the pattern. Now it’s time to mark out for cutting in the scroll saw. This marking was for an earlier failed rendition and the inside diameters were enlarged for the final horns. After cutting the the segment round and hollow now a centerline on the thick top edge and the same on the bottom thin edge was marked out. This is to aid the correct alignment of the segments during glue-up. I learned later (too late) that it would have been even better to mark the centers on all four edges, but it worked out fairly well anyway with only two m...

Read this entry »

Older Entries

View all 241 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com