Joined
·
4 Posts
Rick- sorry it's taken me so long to respond to your request of information regarding the E-Pipe components. I do not have any photos but it's pretty easy to explain. In the bowl area is where the battery will go. Make sure you leave room for wiring and button switch, about 1/4". The shank is where your 510 connector will go, again make sure you have plenty of room for wires. You can decide from the 510 connector what you're going to put on it, cartomiser, tank or in my case I put a Force Kick for variable wattage. All of these will screw onto the 510. Soldering to the 510 is tricky. There are plenty of YouTube videos out there to help in the whole process. I also make a tank cover or forward shank. Make sure your holes are lined up for the stem or mouth piece. That's about it. I use only real tobacco pipe designs because they appeal to me but you can make anything. I have a new customer wanting a similar pipe as the Packer Pipe which I will finish in a few weeks. Good luck on yours!