LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

Wooden Jewelry Display I made for a friend, idea and original plans from woodgears.ca.

I used Maple for the frame and slats, I square pegged the corners with walnut, and the hanging pegs are axle pegs that I purchased at Menards. I had planned to make it rounded like original plans, but when I showed my friend what I was making for her and what I planned to do, she preferred it square. She also, knowing that I dabble at woodburning, and her being an equestrian, requested a horse.

I originally tried finishing with shellac but it was giving me a lot of trouble, I ended up sanding most of the shellac off and using a brushable lacquer, after I built up a good base I sanded with 400 grit up through 1500 grit giving a nice glass smooth surface.

Gallery

Comments

·
Registered
Joined
·
11,362 Posts
My wife likes it. A great way to display and organize jewelries. The woodburning added a nice touch. Well done!
 
Top