LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

First wine caddy to be finished of my current batch. Drilled the center hole slightly too small per the template I was using but I'm not going to try and re-center a forsner bit that's 1/4 larger than the current hole.

Cut out on the bandsaw, sanded to final form, used a 1/4" round over bit on the outsides and 1/2" round over for the center hole. Sanded from 80grit up to 320grit followed by a coat of wood honey. I forgot to brand it but I'll go back and do that later when I brand the rest of the caddies after their sanded to 320.

Not sure the exact type of wood, my guess is maybe marblewood. Board came from a woodcraft exotic wood project pack that was on clearance.

Gallery

Comments

·
Registered
Joined
·
8,109 Posts
Looks nice.
 
Top