LumberJocks Woodworking Forum banner

Project Information

Buddy needed a small table and I had a scrap piece of oak barn wood and some 8/4 sapele scraps. When I ran the oak through the jointer i realized it was white oak, and it was fairly quartersawn/riftsawn. Super simple design, wedged through tenons that I cut with a plug cutter, and two small bow ties to mend a crack. I roughed the leg tapers on a bandsaw and then cleaned them up across the jointer. Finished with shellac, and a thin coat of pastewax on the top.

Gallery

Comments

· Registered
Joined
·
2 Posts
The little details showing through the top are beautiful!
 

· Registered
Joined
·
10 Posts
Those tenons must be very tight for the legs to be secure with no apron. Nice work.
 

· Registered
Joined
·
1,403 Posts
Simple design. Beautiful execution.
 
Top