LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

It was twenty years ago that the tavern table (poker table, card table, pocket table) shown in the picture above was pulled out of an alley shed set for destruction. Long (early part of this) story short, the top had come apart at the glue joints and was black from the ravages of time and exposure to the elements. I pulled out the table and brought it to my dad's nearby shop, where I cleaned and sanded the pieces of the top as best I could at the time. I glued it up and clamped it tight, then left the project for a later time. Kudos to my ever-so-patient father for moving it and saving it for the next 18 years, otherwise the story would have ended there.

Fast forward to a time two years ago. I now have a shop and my slide into hand tools has begun as the build of my Roubo workbench is underway. I need something to set the one piece oak slab of my to-be bench onto as I plane away on it with a Sandusky wooden jack. Yes, I claimed the table and used it's base to set my bench slab on as it got worked up. The table top, over the ensuing months, became a guinea pig for every 'new' piece of iron that came in the mail. I practiced traversing, smoothing, jointing and scraping on that bad boy, sad to say, in no particular order. But it did get progressively smoother, and the charcoal gray wood pealed back to reveal a pretty respectable white oak surface.

This spring I needed to make room for a lumber (stuff!) buy and that meant finishing the table to get it ready for sale. Here's a shot of the inside of the table's aprons and legs assembly when it came apart. I did this so the legs could be jointed / cleaned up prior to final assembly and finishing.



Here are the legs before re-work.



And a close-up as to why I did what I did to the legs rather than simply stripping them and refinishing.



!The jointer was my vintage Craftsman planer/jointer, not a #7 or #8… I love hand planes, but I'm not crazy. Once the tailed apprentice was done with the heavy lifting, I did do some final smoothing. Here it is after assembly, and how I initially intended to list it for sale (final finish up to the buyer).







Then my dad told me he still had a third pocket from the table at his place, and pieces of the fourth and final pocket. About this time the table was destined for my brother-in-law and I was applying final finish myself. I made the missing pieces for the fourth pocket.





I purposely left some character to the top - this table has seen a lot of action (and neglect) in it's day and deserves the right to retain a few battle scars. It also helps the piece retain an authentic character that can't be reproduced. It is again seeing action as a card table!

EDIT: Corrected (DELETED) Photobucket picture links 12 July 2017.

Gallery

Comments

·
Registered
Joined
·
127 Posts
Wow, nice work on saving this piece. My favorite photo is the one that shows the bottom, with it full character showing.
 

·
Registered
Joined
·
1,442 Posts
Absolutely the best story and nicest finish. Thanks for sharing.
 

·
Registered
Joined
·
13,677 Posts
I am SOOOO pumped about this resto. There's nothing cooler in the World. I'm so jealous that you had the opportunity to save this beauty.
 

·
Registered
Joined
·
5,865 Posts
please explain the trays at the corners
i would like to know the purpose i realy like that look
great story and restoration
i am glad you did it

thanks

kiefer
 

·
Registered
Joined
·
17,881 Posts
@kiefer and everyone else - Thanks for the feedback! About the pockets, they hang under each corner of the table so drinks aren't in the way of the cards. And the table stays dry. Pretty good idea. These used to be common around the area years ago, less so now.
 

·
Registered
Joined
·
5,865 Posts
thanks makes sence
good detail even today

kiefer
 

·
Registered
Joined
·
13,957 Posts
Hi,
That is a wonderful table you have restored and a wonderful job done.
I never vseen these drink shelfs before, and think also it's really a cool idea.
Best thoughts,
MaFe
 

·
Registered
Joined
·
194 Posts
Very cool restore! I've some old planks looking for a new purpose, do you mind if I copy your table? What are the dimensions? What finish did you use?
Thanks!
c
 

·
Registered
Joined
·
3,380 Posts
This is a great restore.
 

·
Registered
Joined
·
17,881 Posts
@mafe - Thanks! We're very thirsty folks in this area, and we play lots of cards (Euchre) so this kind of table used to be in all the taverns. Longneck bottles are too tall for the pockets, but a mixed drink or can obviously fits fine.

@woodcut - Of course I don't mind! I'll measure it as soon as I can, but in the meantime I can provide specifics for another I do have. I'll take a couple pics of that one (same thing, only with turned legs instead of square and maple vs. oak construction), take some key measurements and post everything to my blog in that it's not really a project. Stay tuned, hopefully within the next week or so for either or maybe both.

Finish was nothing special. Minwax Early American and Minwax wipe-on poly.

It's cool to think tavern tables might be springing up all over as a result of this post. :)

@RG - Thanks!
 

·
Registered
Joined
·
10,203 Posts
resurecting your thread to tip my hat to a fellow midwesterner who plays Euchre… (let alone anyone who knows wat Euchre is)...

and for "going it alone" on your table re-build/save…

love the drink holders…. they took their cards (and beer) seriously back then. I'll bet they were sized to perfectly fit the house steins.

I wonder if the skirts were extended to prevent passing cards :^)

And if the drink holders helped prevent "table talk" via. how you set your stein down….
 

·
Registered
Joined
·
17,881 Posts
Hello, Vet! The table can't handle six handed or eight handed bid, of course, but for straight up game it's great. And now that you resurrected, I see there's a promise of measurements I haven't fullfilled… hmmm…. I'll get on that.

I have another of these that's all maple, and two oposing corners were painted black, about a 6"x6" patch… The players used chalk in those squares to keep score (using the 'wagon wheel' method, of course). Ingenious…
 

·
Registered
Joined
·
302 Posts
Excellent restoration, and for a great cause! A place to drink and shoot dice and the shit, with friends and family. I'd never seen a tavern table with the lower cup holders, it's a great idea, which you've continued our knowledge of. Thanks!
 

·
Registered
Joined
·
17,881 Posts
Finally remembered to get pictures of the other table I have. Maple top, all original, with black squares painted at opposing corners so card games (Eurchre) could be scored with chalk.



 

·
Registered
Joined
·
46 Posts
Great table!!! I might have to try my hand at something similar for card/ dart night in my basement. Im a huge fan of salvaging old furniture….well done.
 

·
Registered
Joined
·
17,881 Posts
Thanks, Dusty! If you build one, post it on LJs and I'll follow for sure!
 

·
Premium Member
Joined
·
11,557 Posts
Smitty, these are cool card/game tables! I love the black-score-keeping-corners and drink holders. Did you build your maple version or is that another rescue? This is one of the things LJ is great about, finding old projects and re-bring them back to life. Do you know of anyone that built one? Thanks for sharing.
 

·
Registered
Joined
·
17,881 Posts
Maple is untouched from original, have no idea on the age of the piece biput it's at least in the 50-75 range, maybe more.

Oldie but goodie post, yeah! Four years ago!
 

·
Registered
Joined
·
17,881 Posts
Here's a picture of the game table referenced in Post #14 above (image there is lost due to PhotoSucket).

 

Attachments

Top