LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Workshop Information

Location
United States
If I waited until I had the shop set up the way I'd like, (or cleaned up a bit for that matter) these photos would have never been taken. My shop is in the basement of our 1880s home. I had managed to clean it up well enough this spring that my wife actually dared set foot in it!

Virtual shop tour:
http://blip.tv/scripts/flash/blipplayer.swf?autoStart=false&file=http://blip.tv/file/get/Scottb-lumberjockShopTourTake3748.flv%3Fsource%3D3

The basement, while big on floor space, is far from ideal. About 1/4 of the real estate is lost to the oil tank, water tank and furnace, a standing freezer, and several posts - some 6' logs original to the house.

The ceiling is a hair over 6' in most places, fortunate that I'm a hair under, though I've got to be careful in places.

The first picture is the view along the front wall of the house. I've recently set up a long bench, out of salvaged doors (that were shelves previously). There is a recessed, sliding shelf for my miter saw. This winter I built a rolling base for my table saw, which fits under the bench. - or did before I attached a larger top to it. lumber storage above left, a drill press, and sharpening station (just out of the picture) on the right.

The second photo is the reincarnation of my original bench, with legs from a broken folding table. The bench was a behemoth at 6'x2.5' and pretty much could only fit in the center of the room. It did a good job of storing paint cans and all the tools I was "using" forcing me to use a smaller table I built as an actual working surface.

My main work surfaces currently are my table saw, and this mini/saw bench in the third photo.

Not pictured I have a couple small tables that I built out of 2×4s and plywood, as well as my shopsmith (circa 1950) - currently outfitted as a lathe. - turns out to be a bit to low for this, but I'll be rectifying that in the coming year. I also built a 5' tall 4 sided rolling storage unit. shelves on 3 sides, clamps on the back. Holds all my fasteners, and a fair amount of my hand tools - the ones that don't leave the shop in the orange pickle bucket, that is.

The floor is concrete, despite the age of the house, though it is pitted in some places, and there is a poorly repaired shallow hole along the main traffic area.

Due to the lack of any reliable flat surfaces, I tend to do my assembly on the dining room table.

I suppose, like most of us, our shops are a perpetual work in progress. At least I've made some considerable progress this year so far.

My grandfather toiled away in his corner of the basement for as long as I can remember, the only workable space he had was the table of his radial arm saw. Scraps, tools and so on everywhere. At least I have space here or there to move everything out of my way when I've got another project in the works.

I hope to carve out some time this fall (winter at the latest) to get everything up off the floor, sorted and out of the way. Then get someone to wire the shop properly. Pipe dream? probably… but I'll update as things improve.

I also have a 15×15 shed in the yard (odd size for a fairly new structure, don't you think?), additional lumber storage mostly (as well as the outdoor tools) this could serve as a fine small shop space - or an auxilliary one. Good for three seasons at least. If I trust that it isn't going to collapse one of these days. Apart from being in moderate disrepair, it is, essentially a house on stilts, supported on two sides by a retaining wall (at ground level) supported underneath by a couple 4×4's and nearly rotted trees. If this passed inspection under previous owners I'll never know, but the structure seems sound, and is insured. Money being no object I'd take it down and rebuild it elsewhere in the yard.

New pictures, and updated info to follow…. one of these days!

Gallery

Comments

·
Registered
Joined
·
2,616 Posts
Scott, this is a real workshop - love the mess, reminds me of mine.
 

·
Registered
Joined
·
711 Posts
Scott,

Where did I see plans for that "mini-saw bench?" I know I have seen that before.
 

·
Registered
Joined
·
35,383 Posts
Scott small shops need a lot of moving stuff to get the one you need into the place where you need it.

But the quality of work comes from "WITHIN".

Great shop.
 

·
Registered
Joined
·
3,659 Posts
woodspar, the sawbench came from Woodsmith, I think. I'll PM you if I can dig out the issue. I made it last summer, and I think I had the issue for a little while before I did, if that helps narrow it down.

Thanks Karson, My table saw is on wheels, and fits just under the "counter" (If I take off the fence and/or MDF top I have pictured here.

There is only about 1/2 of my shop pictured, the rest is less organized!
 

·
Registered
Joined
·
4,569 Posts
Don't let OSHA see that shop. You've got a lot of trip hazards in those pictures. LOL. You do great work from there!
 

·
Registered
Joined
·
8,904 Posts
AAAAHHHH! AAAAHHHH! AAAHHH! MY EYES WON'T STOP BURNING! AAAAHHHHH!
 

·
Registered
Joined
·
4,967 Posts
Hey, if I'm not tripping over something, or banging my knee into something, then my shop is just too clean. This is a great space. Thanks for the pictures!
 

·
Registered
Joined
·
1,819 Posts
Ooooo! So the little woman has you in the dungeon huh? Cool! But you're far enough away to be safe from my lab. Unless ya stop by someday for a cold one!

I spent a winter in Danville, NH. about ten years ago…is it still a dry county?
 

·
Registered
Joined
·
3,659 Posts
Last spring there was nothing dry in NH, as far as the prohibition sense, I'm not aware of any "dry" places in New England
 

·
Registered
Joined
·
1,506 Posts
I like the video. Took a while to "load" on my PC . . . but worth the wait. Its great to see others shops and how they handle everyday woodworking issues.

Good job.
 

·
Registered
Joined
·
27,252 Posts
Hi Scott,

You posted this long before I came on board but I am glad it migrated to the top of my review list. You have an interesting shop. I wouldn't have any problem working in there (5'6"). You certainly have enough wood and offcuts to last unless you get superbusy. I really enjoyed the video tour (of course I wished I had taken a dramamine beforehand) :)

Nice shop and seeing the video was a novelty.

Thanks for the post.
 

·
Registered
Joined
·
1,798 Posts
I'm glad my shop isn't the only one that looks kind of like that!!
love the ending by the way!!
 

·
Registered
Joined
·
577 Posts
Cool basement! Must be kinda nice living in a house that isn't a cookie cutter variety of place, like many are today. Though it does appear to make putting in a shop problematic, or you just have too much stuff…. Thats the problem I have.
 

·
Registered
Joined
·
3,659 Posts
Thanks. Yep got a great OLD house, it has it's quirks,... namely the posts in all the wrong places. I see my shop has evolved of late. (it certainly is cleaner!) Time for some new pics I s'pose.
 
Top