LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Comments

·
Registered
Joined
·
17,398 Posts
Beautiful wood colour combination and simple straight design.
 

·
Registered
Joined
·
7,555 Posts
Nice Job!. For some reason the photos make your shakers look gigantic 8^)

I'm thinking they would go perfectly with a napkin older base…..

What diameter of holes did you drill for the shaker ends?
 

·
Registered
Joined
·
177 Posts
Thanks Splintergroup!

I agree.. maybe a tray to sit in with napkins in the middle would be cool.

Holes are 1/16th I drilled all the way through for 9 holes on the pepper, but only 5 holes through on salt because it flows faster. other holes are half depth. Inner cavity is 1/12 inch diameter hole inside a 2×2 by 3.5 body.

Nice Job!. For some reason the photos make your shakers look gigantic 8^)

I m thinking they would go perfectly with a napkin older base…..

What diameter of holes did you drill for the shaker ends?

- splintergroup
 

·
Registered
Joined
·
177 Posts
Correction.. height is almost 4" with the top and bottom. Center section was about 3.5"
 
Top