LumberJocks Woodworking Forum banner

Project Information

This remote control caddy is made from Mahogany and is approximately 8-1/2×7-1/2×6-1/2 (the highest point of the arch). The larger opening (3-1/2×6-1/2) can be used for a large remote control or an eBook reader such as a Kindle or Nook like the two shown in the last picture. The three smaller openings are 3-1/2×1-1/4 and 3-1/2×2-1/2 and should accommodate most normal size remotes. The caddy has been finished with 7 coats of General Finishes High Performance PolyAcrylic with 320 grit sanding between the first two coats, 400 grit for the next five coats, and #0000 steel wool for the last coat.

Gallery

Comments

· Registered
Joined
·
438 Posts
Very nice, and I see a couple ideas on that I'll have to ste… uh, borrow.
 

· Registered
Joined
·
0 Posts
Another outstanding project! When will you stop writing code and start making sawdust for living?
 

· Registered
Joined
·
32 Posts
Mike,
LOL! Maybe one day, I think I sill write code better than I wood work!
 

· Registered
Joined
·
32 Posts
Feel free to stea… uh borrow anything you like from any of my projects. :)
 

· Registered
Joined
·
49 Posts
Very cool. Have to agree with Lifesaver2000.
 

· Registered
Joined
·
3 Posts
This is a great idea! I think I might have to make one with an auto retracting tether to the remote so I stop losing the freaking thing.
 
Top