LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

Pergola built from recycled "redwood" swingset off craigslist. (Redwood is in quotes because it was partly redwood, partly cedar.) There were many through-holes from the bolts that held the swingset together; my first attempt was to fill them with plugs, but that looked terrible. The second attempt (first closeup) was to plow out a mortise, and fill it with a strip of wood. That looked ok, but I wanted something better. A friend suggested that butterflies might look nice. I'd never done them before, and it turned out pretty well (second closeup). The lattice is held together with staples, and the vertical strips go into mortises in the top and bottom cross pieces. These are mortise-and-tenoned into the uprights. The last picture is the ellipse jig built for the project. A big mistake with that was building a holder for a jigsaw at the end. That does not work - the blade will not be at the correct angle to cut the ellipse. I ended up jamming a pencil into the holder, and tracing out the ellipse, then cutting and sanding it in. I should have built a holder for a router.

It's finished with Heritage Natural Finishes Concentrated Oil, with UVA and mildew protectant added.

Gallery

Comments

·
Registered
Joined
·
5,820 Posts
Very nicely done.
 

·
Registered
Joined
·
11,472 Posts
Very Nice Project and Well Done! Thanks For Posting.
 

·
Registered
Joined
·
11,362 Posts
Fantastic work on that beautiful pergola. Like the look of your recycled wood and the bow ties.
 
Top