Project Information
Here is a farmhouse style table I just completed for stock
It is 30"H x 36"W x 84"L, made from "wormy" reclaimed urban white oak, poplar and maple turned legs.
The legs are attached with intersecting haunched mortise and tenons. The stretchers are attached with half blind dovetails.
![]()
![]()
![]()
I started the finishing process with a shot of GF medium brown dye stain, covered with one coat of EmTech 9000sc.
Shown below after a light sanding.
![]()
Then I sprayed 2 coats of GF crimson red milk paint (thinned about 15-20%), followed by a coat of 9000sc.
![]()
The final color was GF sage, followed by another coat of 9000sc.
![]()
The top is finished with 3 coats of EmTech 8000cv
![]()
It is 30"H x 36"W x 84"L, made from "wormy" reclaimed urban white oak, poplar and maple turned legs.
The legs are attached with intersecting haunched mortise and tenons. The stretchers are attached with half blind dovetails.
I started the finishing process with a shot of GF medium brown dye stain, covered with one coat of EmTech 9000sc.
Shown below after a light sanding.
Then I sprayed 2 coats of GF crimson red milk paint (thinned about 15-20%), followed by a coat of 9000sc.
The final color was GF sage, followed by another coat of 9000sc.
The top is finished with 3 coats of EmTech 8000cv
