LumberJocks Woodworking Forum banner

Project Information

Thanks SPalm for sharing the idea. Made of Bloodwood, Berlinia, Yellowheart, Purpleheart,and Canary wood. About a four inch square block To start with. 3/4 of sides are slightly tapered back.Finished with one spit coat of shellac ,three coats wipe on satin poly and a thin coat of wax.The rare earth magnet and ball bearing does a great job of holding paper steady on the curved front surface.

Gallery

Comments

· Registered
Joined
·
2,185 Posts
Well done. The multiple woods adds a nice touch.
Nice job of tapering too.

Steve
 
Top