LumberJocks Woodworking Forum banner

Journal Content

Series Name
Nightstands
I made the stock for the drawer webs. Lots of leftover Sapele.


I cut the mortise in the side assembly.


I dry fitted the drawer webs to make certain they would not crowd the back.


I glued up the webs. They are joined with a loose tenon.


Next up is staining the webs and final glue up of the five carcasses. From there Drawers and finish application.

Comments

· Registered
Joined
·
4,578 Posts
Looking like a nice project. The only thing is your shop area is to clean. :)
 

· Registered
Joined
·
748 Posts
Looking like a nice project. The only thing is your shop area is to clean. :)
Ha. I can't work in a mess. I have to put things away every few days and run the vac around. Also, the dog and I will track it into the house otherwise. He loves to find the biggest pile of chips/dust and lay in it.
 

· Registered
Joined
·
4,578 Posts
I can relate, I usally put the tools away as I finish up with them. As for tracking the saw dust in the house, I have about 100' walk out to the shop. If its really bad I use the air gun to blow off the dust off of me. Not much longer through, getting ready to run the duct work for the DC System.
 

· Registered
Joined
·
3,089 Posts
Nice progress!
 

· Premium Member
Joined
·
4,322 Posts
I'm still following along.
 
Top