LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

well I guess today was shop improvement day,got my drill press cabinet done then built my ivan majuvla inspired circle sanding jig.i was going to incorporate kiefers fine adjustment feature but decided I really didn't need it.i can sand circles from about 2-1/2" up to about 44",which should take care of my needs.made from shop scraps,and rockler knobs.this is a simple jig that only took me a couple hours of time well spent for the future.once again thanks ivanfor the inspiration.

Gallery

Comments

·
Registered
Joined
·
5,636 Posts
Great project and you can make some monster wheels with that set up.
 

·
Premium Member
Joined
·
28,627 Posts
thanks htl,when I saw it I had to make it.
 

·
Registered
Joined
·
17,398 Posts
WOW! You have some serious sanding maschine there (not like my ''poor man sanding maschine'')! It's a great honor to inspire you (or anybody) here on LJ, since I started learning woodworking here very shy and modest.
Thanks again for that, Pottz.
 

·
Registered
Joined
·
8,706 Posts
Wow you have been busy, and thats one impressive sander you have there. Along with the three possibly four Battery drills I spotted in the background!
 

·
Premium Member
Joined
·
28,627 Posts
ivan-thanks for the compliment and the inspiration.
rob-thanks,you have a keen eye for detail.
 

·
Premium Member
Joined
·
10,168 Posts
I REALLY NEED to make 1 of these fine looking jigs ….... my jig now has 69 holes in it …......LOL …. what material did you use Larry ???? GREAT JOB :<))
 

·
Premium Member
Joined
·
28,627 Posts
the top with the center slide is 3/4 ply and the the rest was 3/4 melamine,all left overs.this was real simple to make,a couple hours.
 

·
Registered
Joined
·
5,284 Posts
I need to rember this, thanks to you and Ivan for the idea. Don't know how I missed this in the first place.
 

·
Registered
Joined
·
1 Posts
what do you use to lock down the slide in whatever position/radius you want it to be?
 

·
Premium Member
Joined
·
28,627 Posts
what do you use to lock down the slide in whatever position/radius you want it to be?

- KB47
look at the last pic you will see a black knob.
 

·
Registered
Joined
·
1 Posts
Has anyone adapted a circle jig without a center pin hole? Need help. Thank you!
 
Top