LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

Hi Everyone,
Here are more crosses.
I made these for my daughter for a up coming crafts show.
I've been playing with rock inlay and these 2 are my first attempts..The green rock is called malachite. I found a few strands of this rock on amazon for like 5.00. I simply used a homemade rock crusher ( found the design on line) to make smaller and smaller pieces then flooded the channel with thin supper glue. Followed up with a brisk sanding till it seemed polished. I have to admit I need to do more research on the proper sandpaper as it went thru the stuff I normally use pretty quickly.
The other crosses with metal I used "woods metal" ..it melts at like 220 and is easy to work with. I still have a ways to go with my technique as it seems amateurish but as in all things it's the journey that is as important.
I applied a light stain and used glaze coat as a finish..which is a real pain to work with.
Over all I'm pleased with the results. Thanks for looking.

Gallery

Comments

·
Registered
Joined
·
501 Posts
Nice crosses, what are the sizes of these, did you use a ship lap joint to join the cross arm, I need to make one, but the lady wants it to be 36" long, and wants it made from spalted wood to look old I guess.
 

·
Registered
Joined
·
80 Posts
These crosses are about 10 inches tall and 5 1/2 across… I used a cross lap joint for attaching the 2 pieces..
Most if not all my information comes from http://thecrossweb.com/ " cross making 101" You'll find a lot of great information ..regards
 
Top