Project Information
Built to mimic my full size stratocaster, this little guy took shape slowly. I started with a single piece of basswood that I carved to shape.
The biggest challenge was stringing the mini strat. Eventually I settled on the strands from a small braided wire. These were wound and glued to the tuning pegs, then fed straight through the body (as in a real guitar!) and fastened at the rear to maintain tension.
The biggest challenge was stringing the mini strat. Eventually I settled on the strands from a small braided wire. These were wound and glued to the tuning pegs, then fed straight through the body (as in a real guitar!) and fastened at the rear to maintain tension.
Continue with Google
