LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

Similar to Jay Bates version, but I attached verticle supporst every other stud, 32" spacing…. no regrets.

On right side I doubled up 2×4 verticlts so I could easily store 8ft material - ply or 2×4's wouldn't fit if I didn' t double up one side.

Lesson learned" the pipe is.84", and I drilled my holes with a 0.875" spade bit on drill press at 1deg angle… I end up level w/ 1 degree but I'd increase the angle = experiment, maybe 4 degree or so.

use a carbide blade in sawzaw and each cut is only 30 seconds on black pipe. Space out so in vice so you rest against vice, instead of freehanding it w/ sawsawz.



29 Posts
Nice Rack!