LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Project Information

i made these out of regular pine - i didn't stain these before i took pictures but now they are stained with classic maple stain . they only took me about 1 hr to finish both on the bottom where i cut out the curves i used one side for the first then i took the other piece and made the second shelf it worked out well and i had no scrap from that piece

Gallery

Comments

·
Registered
Joined
·
35,383 Posts
It almost looks like (on the second picture) that the lower piece is the cutoff from the top.

If it was not, then that woukld make an interesting combo.

Good job.
 

·
Registered
Joined
·
563 Posts
nice job using one board and one cut for both bottoms. they look great.
 

·
Registered
Joined
·
18,890 Posts
that's what I was thinking, Karson - I flipped back and forth several times to check it out.
 
Top