Project Information
I needed some place in my crowded garage to store my stepladders. So I looked above my garage doors and thought that space is wasted. So I measured and found out that my ladders would store there.
I took 4" strips of plywood for the 8' ladder and 2' strips for the 6'. I used cutoff 2×4's that I cut to the wideth of the ladders at top and bottom plus 8" and 4" for each ladder. I also added a few inches so the ladders won't be tight when sliding them in.
After a few screws the brackets were done. Next I screwed the brackets into the ceiling. Next I slid both ladders in. Done. No more ladders in the way.
Hope this helps some of you like me with limited space.
I took 4" strips of plywood for the 8' ladder and 2' strips for the 6'. I used cutoff 2×4's that I cut to the wideth of the ladders at top and bottom plus 8" and 4" for each ladder. I also added a few inches so the ladders won't be tight when sliding them in.
After a few screws the brackets were done. Next I screwed the brackets into the ceiling. Next I slid both ladders in. Done. No more ladders in the way.
Hope this helps some of you like me with limited space.
Continue with Google
