LumberJocks Woodworking Forum banner

Project Information

A few months back I bought the Incra LS Positioner with the table, insert and a leg set with the intention of mounting the table in a cabinet with dust collection and storage. Here's my finished product. The base cabinet is 3/4" maple plywood with popular face frame. The drawers are Baltic birch plywood with poplar drawer fronts mounted on full extension ball bearing guides. Double locking casters all around. The template storage organiser is made from two sheets of synthetic cutting board material and machined with 52 individual slots and the top is covered with poly carbonate then mounted in the top drawer. Rockler safety switch mounted on the side and a 4" dust port and a vented door on the front of the router compartment. I applied 2 coats of General Finishes Seal A Cell and 3 coats of semi gloss Oil & Urethane. The top is attached through 6 corner blocks, weather stripping between the top and the cabinet structure and secured with just enough pressure to slightly compress the weather stripping. Thanks for viewing!

Gallery

Comments

· Registered
Joined
·
535 Posts
Excellent router table, very well done :)
 

· Registered
Joined
·
5,826 Posts
Wow! This is really nice. Great job and nice presentation too.
 

· Registered
Joined
·
169 Posts
Very cool. Why did you vent the router access door? Doesn't dust come out of there?

I thought maybe you did this for cooling, but if your 4" port sucks from this area, I thought you would want it sealed so it sucks all the dust from the router bit throat plate.
 

· Registered
Joined
·
546 Posts
Great setup!

I'm about to build a cabinet for my LS Positioner. I love the template storage channels. I saw someone else do something similar. He posted a PDF on the channel milling. I love the idea of using the plastic. Definitely going with that.
 

· Registered
Joined
·
19,715 Posts
Beautiful work Mike ,almost to nice for shop use, but I'm sure you will get tons of use out of it.
 

· Registered
Joined
·
91 Posts
Do you have a sketchup for this table? I'm going to build one soon for my incra and I like your design. Especially the template holders but I can figure that out myself. Great table.
 

· Registered
Joined
·
0 Posts
Fantastic work! Would you be willing to share your measurements for this project?
Cheers
 
Top