This is my new shop, it is a 40' X 60' pole building 10 ft. high on the inside to clear the top of my tractor with a 6", 1/2 rebar reinforced concrete floor and a 200 amp service,and 16 eight foot lights and a 12X12 sliding doors on each end. This picture was a very cold day in Dec. 10 degrees above 0. I had the time on my side so I waited 4 mo. before putting anything in the shop on the floor , I have always heard that there is two kinds of concrete floors, those that are cracked and those that will be cracked. I was going to keep it simple and not have much of a woodworking shop, but that didn't work out, My first machine was the Craftsman Pro. 10" table saw (it is for sale). The other machines I bought at the IWF 2008, I like big band saws/resaws this one is 24" and works like a dream this is the third one I have had, not all the same make, I had a woodmizer sawmill and the resaw made it easy to resize stock. The planer is a 20" with a spiral cutter head and the jointer 8" x 76" G0490 has the parallelogram table & spiral cutter head. The only thing I didn't like about these machines was the grease that was packed in every part and some was almost imposible to remove with out taken them complete apart which was a good thing for me, I like to see how things are machined and put together.