Project Information
Wood And Materials Used
Cherry, Maple
Tools Used
Table Saw, Wedgie Sled, Lathe
This is the bonus item that i included with the main item for the Swap. Created by gluing thin strips of Maple to each side of a piece of Cherry, (half of the strips milled up). Cut the wedges with the wedgie sled and added smaller pieces of Maple to create a verticle joint. All of the rings were clamped using hose clamps, before gluing the rings together they were sanded flat on each side.
Chucked up in the lathe, worked the outside followed up on the inside. Finished with Danish Oil followed with Howard's Feed and Wax, then buffed. Once off the lathe I cut the little feet in the bottom with chisels, files and sanded, then applied finish.
Thanks for looking and comments are always welcome and appreciated.
