| Blog series by shipwright | updated 11-04-2011 07:25 AM | 2 parts | 85965 reads | 71 comments total |
Part 1: I could kick myself
A few months ago I spent many many hours trying to perfectly align a set of “box joint hinges” for my project ” A Little Cabinetree” After I finally got them working I installed them on the edges of the MDF sides and doors and then veneered over the whole works. The only good part was that there were enough left over prototype parts that I could make a hinge for my next project from the cast-offs Then this week I was making a tea box for a friend and when...
Part 2: A Sketchup Model to Make it Easier (I hope)
I have had several people PM me who were having trouble with the details of the integral hinge in this blog so I’ve done a sketchup to try to clarify it. I hope I haven’t just made it more confusing. If this doesn’t clear it up, I’ll just keep trying. Here’s the link: https://3dwarehouse.sketchup.com/model.html?id=49b42e2ce1f6da5152d9fc61873164a1 I’ve added the sketchup link to the first blog page so it’s all in one place and easy to find...
