shimster's Blog

  • Advertise with us
This blog is written by shimster | 6 entries so far

Latest Entry

New Basement Workshop Pics #4: TS Alignment & ZCI Update

02-01-2011 06:41 PM by shimster | 0 comments »

All is good. Blade was surprisingly straight after binding. What was off was my table top relative to the blade. I found some overly simple tips on alignment from the Wood Whisperer on YouTube. My table was over 1/8” out of alignment over the 8” or so of exposed blade. This became obvious to me after making my first ZCI (now in the trash bin). It was very clear it was out. Next I lined up my fence relative to the table (and blade), and then adjusted the fence vertically with a speed square. Installed the custom riving knife also. Got 4 new ZCI’s roughed and have a new Oshlun combo blade on the way. For now, I’ll keep the garbage Ridgid blade for rough...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics