No bench. No skills. Go!

  • Advertise with us
This blog is written by shawnSK | 7 entries so far

Latest Entry

Tool tote - chisel rack and finishing

04-17-2020 01:25 AM by shawnSK | 9 comments »

Finishing up took quite a while. I made a chisel rack from a length of thin poplar. And I made spacers from the same thin poplar. But I doubled my work since the spacer wood was not thick enough to accommodate larger tools. I basically cut the wood twice and laminated them to make each spacer, then glued them to the main piece. Lots of cutting and gluing and double checking. I only glued one spacer in the wrong spot, and caught my mistake before the glue had time to set. I made one too wide and had to saw it apart and chisel out the overage. I was also building the rack for tools I didn’t own yet. In the meantime I placed a Lee Valley order. Instead of guessing, I decide...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics