Stanley #45 #2: Cutter screw and wheel removed all I lack is the Tote

  • Advertise with us
Blog entry by sfglass posted 05-25-2016 08:06 PM 805 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Aquisition to Present Part 2 of Stanley #45 series Part 3: Stanley #45 Tote Removal »

As the title says I managed to remove the cutter screw and wheel.
Gently tapped the pin that engages the knife from the screw then made a tool to push the “keeper Pin” up in the frame to allow the screw to pass through its opening in the frame.
Apparently I have maxed out the upload limit on this blog so I will put a link to a drop box file I can share.

Still hoping someone has a #45 with the tote removed and can share some pics of how the pins work for it.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics