scrappy's Blog

  • Advertise with us
This blog is written by scrappy | 27 entries so far

Latest Entry

Making a Wood Bracelet with Scrappy #4: Part #4 Finishing and Final Assembly

10-04-2011 07:21 AM by scrappy | 15 comments »

Welcome Back! We will begin be going over some safety tips. First of all it is always important to know your tools and use them safely. You will be working with very small pieces of wood so, the utmost care is needed. Always use all guards and a zero clearance blade on the table saw. Always use proper eye and ear protection. If something does not seem safe, then stop! Step #4 In this section we are going to be doing our Final Sanding, Finishing and Assembly of the bracelet. Make sure to get all saw marks off of the surface and sand to the final grit for a good finish. Grit used will depend partly on what kind of wood you used and what finish you will be using. I am so...

Read this entry »

Older Entries

View all 27 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics