Building my wooden Screw #14: More pics
More details about the Guide nut – where you see the red, that is where I had to trim out part of the thread that prevents the screw from fully advancing as the thread is being cut. If you do this, then you’re creating the wood screw will be so much quicker than mine. Only thing you may have to fight is the depth of your router bit. If too deep, then the freshly screw will be loose in the guide nut. If not deep enough, the advancement of the screw will get nearly if not impossible to advance. If this is the case. STOP! Slowly advance the router down. I looked at the depth of the bit and compared it to the guide nut depth. I believe it should be nearly equal to what you...